Best picks

9 Best Pumps for Sluice Boxes (November 2026)

Updated on · By the Metal Detector Help team

The best sluice box pump include the AQUASTRONG 1 HP Sump Pump 4500 GPH for large recirculating setups, the MAXZONE Submersible Boat Bilge Water Pump 12v for 12V battery setups, and the SEAFLO 01 Series 1100 GPH Bilge Pump for reliable 12V flow.

On this page (9 sections)
  1. Our top picks for a sluice box pump
  2. Best sluice box pump flow for your box size
  3. How we compared these pumps
  4. What power source should a sluice box pump use?
  5. How do I set up a recirculating sluice box pump?
  6. How do I keep pump flow steady all day?
  7. Which riffles and legs work with a pump fed sluice?
  8. When should I upgrade from a bilge pump to a sump pump?
  9. Verdict: which best sluice box pump should you buy?

The best sluice box pump for most people is the AQUASTRONG 1 HP Sump Pump 4500 GPH, because it gives you high flow, a 30 ft lift and ready hose adapters in one AC powered unit.

If you work off a battery, the 12V bilge pumps below are a better fit for a sluice box with pump setup.

A pump does more than move water.

It sets the speed of the water in your box, and that speed decides which material stays in the riffles and which washes away.

Too little flow and sand packs the matting.

Too much flow and fine gold can ride out with the tailings.

Our score weighs specs, features and buyer feedback against what you are shopping for.

We compared flow rate, lift, power source, outlet size and weight across every pick here.

Start with your power source, then your box size.

AC power at a fixed camp or garage favors a sump pump.

A remote creek with no outlet favors 12V.

Our gold panning equipment guide helps you plan the rest of the kit around the pump you choose.

Our picks at a glance

  1. 1 AQUASTRONG 1 HP Sump Pump 4500 GPH
    Best for large recirculating setups

    AQUASTRONG 1 HP Sump Pump 4500 GPH

    9.7/10 our score

    See it on Amazon
  2. 2 MAXZONE Submersible Boat Bilge Water Pump 12v
    Best for 12V battery setups

    MAXZONE Submersible Boat Bilge Water Pump 12v

    9.6/10 our score

    See it on Amazon
  3. 3 SEAFLO 01 Series 1100 GPH Bilge Pump
    Best for reliable 12V flow

    SEAFLO 01 Series 1100 GPH Bilge Pump

    9.4/10 our score

    See it on Amazon
  1. 4ECO-WORTHY 33-Series Industrial Water Pressure Pump 110VCheck it
  2. 5Tsurumi Pump HS2.4S Submersible Trash Pump with

    Tsurumi Pump HS2.4S Submersible Trash Pump with

    Best for sandy, debris laden water
    Check it
  3. 6nVent KING INNOVATION 48024 Siphon King 24

    nVent KING INNOVATION 48024 Siphon King 24

    Best for no power hand pumping
    Check it
  4. 7Martin Prospecting Gold Mining Fine Gold Recovery MiniCheck it
  5. 8Careland Mini Sluice Box

    Careland Mini Sluice Box

    Best mini kit with matting included
    Check it
  6. 9FILTERUP 1100 GPH Boat Bilge Water Pump

    FILTERUP 1100 GPH Boat Bilge Water Pump

    Best 12V pump with hose kit
    Check it

Our top picks for a sluice box pump

The AQUASTRONG leads on raw capacity for larger recirculating rigs.

The 12V bilge pumps win where portability and battery power matter more than volume.

1

AQUASTRONG 1 HP Sump Pump 4500 GPH: Best for large recirculating setups

AQUASTRONG 1 HP Sump Pump 4500 GPH, sluice box pump
9.7/10Our score
  • 1 HP motor
  • 4500 GPH at 5 ft
  • 30 ft maximum lift
  • 115V AC

High flow and high lift for larger sluice boxes and longer hose runs.

See it on Amazon

Pros

  • Highest flow in this group
  • Strong lift for high boxes
  • Includes hose adapters

Cons

  • Needs AC power
  • Larger and heavier than bilge pumps

The AQUASTRONG suits prospectors running a larger sluice box with pump recirculation from a tote or pond.

Its 1 HP motor pushes 4500 GPH, or 75 gallons per minute at 5 ft, with a 30 ft maximum lift.

That headroom matters when your feed head sits high or your hose run has bends.

It uses 115V AC, so it fits car camp, garage or home setups with a close outlet.

The bottom suction design pulls water down to 1/5 inch from the surface, which helps keep the pump fed in a shallow tote.

The 1-1/4 inch NPT discharge comes with adapters for 3/4, 1 and 1-1/4 inch hose, plus a 10 ft power cord.

AQUASTRONG says the thermoplastic casing resists corrosion and abrasion, and a thermal overload protector guards the motor during dry running.

Trade-off: at 8.5 lb it is heavier and bulkier than a bilge pump, and it cannot run on a battery.

Choose it for volume, not for backpacking.

AQUASTRONG 1 HP Sump Pump 4500 GPHCheck it on Amazon
2

MAXZONE Submersible Boat Bilge Water Pump 12v: Best for 12V battery setups

MAXZONE Submersible Boat Bilge Water Pump 12v, sluice box pump
9.6/10Our score
  • 1100 GPH
  • 12V DC
  • 13 ft head
  • 1-1/8 in outlet

Compact 12V pump for battery powered recirculating sluice setups.

See it on Amazon

Pros

  • Runs on 12V DC
  • Compact and light
  • Suited to small boxes

Cons

  • Lower flow than sump pumps
  • Needs a 12V battery and wiring

The MAXZONE suits battery powered setups where you want a small pump that runs all day from a 12V source.

It delivers 1100 GPH on 12V DC with a 13 ft head and a 1-1/8 inch outlet.

That flow is well matched to a small or mid size sluice box pump recirculating loop.

At 14.1 ounces and about 4 inches long, it tucks into a tote with little effort.

MAXZONE says the water cooled motor is built for harsh marine conditions, which translates to steady use in muddy panning water.

You will need a battery, wiring and a switch, since this is a non-automatic pump with no controls built in.

The 1-1/8 inch outlet pairs with standard bilge hose, which keeps fittings simple.

Trade-off: 1100 GPH will not fill a large box fast, and lift drops as hose length grows.

Pick it for portability over raw power.

MAXZONE Submersible Boat Bilge Water Pump 12vCheck it on Amazon
3

SEAFLO 01 Series 1100 GPH Bilge Pump: Best for reliable 12V flow

SEAFLO 01 Series 1100 GPH Bilge Pump, sluice box pump
9.4/10Our score
  • 1100 GPH
  • 12V DC
  • 14.8 ft max head
  • Anti-airlock protection

A 12V bilge pump with anti-airlock protection and a stated 4-year warranty.

See it on Amazon

Pros

  • Anti-airlock protection
  • Slightly higher head than similar 12V pumps
  • SEAFLO backs it with a 4-year warranty

Cons

  • Needs 12V DC power
  • Flow is modest for large boxes

The SEAFLO suits buyers who want the same 12V convenience with a little more head and a warranty behind it.

It moves 1100 GPH on 12V DC with a 14.8 ft maximum head, slightly higher than the MAXZONE.

Current draw is stated at 3.0A, with a 6.0A maximum.

SEAFLO lists anti-airlock protection, which helps the pump keep priming after air gets into the line.

The snap-off strainer base makes cleaning easier when grit builds up in a recirculating tote.

The outlet is 1-1/8 inch, the same size used across most bilge hose kits, so fittings are easy to find.

SEAFLO backs this pump with a 4-year limited warranty, the longest stated warranty in this group.

Trade-off: flow is still capped at 1100 GPH, so large boxes will take longer to reach full speed.

For a compact sluice box with pump, that limit is usually fine.

SEAFLO 01 Series 1100 GPH Bilge PumpCheck it on Amazon
4

ECO-WORTHY 33-Series Industrial Water Pressure Pump 110V: Best for pressure fed spraying

ECO-WORTHY 33-Series Industrial Water Pressure Pump 110V, sluice box pump
9.1/10Our score
  • 4.0 GPM
  • 50 PSI shutoff
  • 110V AC diaphragm pump
  • Self-priming to 9.8 ft

A pressure pump that turns on and off on demand for spraying and feeding a box.

See it on Amazon

Pros

  • Pressure switch for on demand flow
  • Self-priming
  • 110V AC, no battery needed

Cons

  • Low flow for wide sluice boxes
  • Best as a feeder, not a high volume recirculator

The ECO-WORTHY suits a different job: pressure fed spraying and steady feeding of a box from a tank.

This diaphragm pump delivers 4.0 GPM at 50 PSI on 110V AC, and it turns on and off on demand with its pressure switch.

Close the sprayer and it stops.

Open it and it runs.

It self-primes to 9.8 vertical feet and ECO-WORTHY states lift up to 131 feet under pressure conditions.

That pressure matters for a spray bar or a nozzle, where a bilge pump would struggle to push water through a restrictor.

Thermal overload protection stops the motor if temperature rises past a safe point.

The pump weighs 6.8 lb and includes garden hose adapters for quick hookup to a tank or tote.

Trade-off: 4.0 GPM is low volume for a wide sluice box, so water speed across matting will be gentle.

Use it for classification, spraying and fine gold work, not for a high volume sluice.

ECO-WORTHY 33-Series Industrial Water Pressure Pump 110VCheck it on Amazon
5

Tsurumi Pump HS2.4S Submersible Trash Pump with: Best for sandy, debris laden water

Tsurumi Pump HS2.4S Submersible Trash Pump with, sluice box pump
8.9/10Our score
  • 1/2 HP, 115V
  • 2 in discharge
  • Handles debris to 0.3 in
  • 20 ft cord

A trash pump built to move water with sand and solids from a feed pond.

See it on Amazon

Pros

  • Handles sand and solids
  • Angled 2 in discharge
  • Tsurumi gives a 2-year warranty

Cons

  • Heavy at 29.1 lb
  • Oversized for small mini boxes

The Tsurumi HS2.4S suits prospectors pumping dirty feed water with sand and solids.

Its semi-vortex impeller and agitator handle debris to 0.3 inch, which protects the pump when you recirculate from a muddy pond or a settling tote.

It delivers 2340 GPH in the title, with a 1/2 HP motor on 115V and a 2 inch angled discharge.

The angled port gives you more choice in hose routing, and the 20 ft cord helps reach a tote from a distant outlet.

Tsurumi gives a 2-year warranty and UL and CSA certification.

The aluminum body keeps weight at 29.1 lb, which is still heavy for carrying on foot.

Trade-off: this is a work site pump, not a light panning pump.

For clean recirculating water you will pay for debris handling you do not need.

For sandy creek water, that handling earns its keep.

Tsurumi Pump HS2.4S Submersible Trash Pump withCheck it on Amazon
6

nVent KING INNOVATION 48024 Siphon King 24: Best for no power hand pumping

nVent KING INNOVATION 48024 Siphon King 24, sluice box pump
8.6/10Our score
  • 24 in hand pump
  • 36 in discharge hose
  • Self-priming
  • No electricity needed

A portable hand pump for moving water where no power is available.

See it on Amazon

Pros

  • No battery or outlet needed
  • Light and portable
  • Long 36 in hose

Cons

  • Manual effort for continuous flow
  • Too slow for a running sluice

The Siphon King suits no power situations where you need to move water by hand.

This 24 inch hand pump has a 36 inch discharge hose and self-priming action that moves up to one gallon in a few strokes.

No battery, no outlet, no fuel.

At 1.6 lb it is the lightest option here and easy to carry to a remote spot.

King Innovation lists uses like draining pits, trenches and valve boxes, and the same design works for topping up or draining a panning tote.

The steel body and simple manual design mean few parts to fail in the field.

It also works as a backup when a powered pump clogs or a battery runs down.

Trade-off: hand pumping cannot sustain the continuous flow a sluice box needs.

Treat it as a utility tool for filling, draining and priming, not as your main sluice box pump.

nVent KING INNOVATION 48024 Siphon King 24Check it on Amazon
7

Martin Prospecting Gold Mining Fine Gold Recovery Mini: Best mini sluice with pump included

Martin Prospecting Gold Mining Fine Gold Recovery Mini, sluice box pump
8.4/10Our score
  • 24 x 4.5 in mini sluice
  • 110V submersible pump
  • Flow valve
  • 2 lb

A complete mini sluice and pump kit for fine gold recovery at home.

See it on Amazon

Pros

  • Pump included
  • Flow valve for adjustment
  • Compact 24 in size

Cons

  • Small box limits volume
  • 110V only

Martin Prospecting suits home users who want a ready to run mini system for fine gold recovery.

The set pairs a 24 x 4.5 inch mini sluice with a 110V submersible pump and a valve to adjust flow.

At 2 lb, the whole kit is easy to store and set up on a table.

The flow valve is the key feature here.

It lets you slow the water down for fine gold without changing the pump.

That control matters more in a small box, where a fixed flow can wash light material out too fast.

The plastic body and corded electric power suit indoor or garage use with a nearby outlet.

NEMA 1-15 connector is listed, so check your outlet type before you order.

Trade-off: the small box limits how much material you can run per hour.

If you want to process larger batches, start with our best mini gold sluice box guide to compare sizes first.

Martin Prospecting Gold Mining Fine Gold Recovery MiniCheck it on Amazon
8

Careland Mini Sluice Box: Best mini kit with matting included

Careland Mini Sluice Box, sluice box pump
8.2/10Our score
  • 24 x 4 in mini sluice
  • Recirculating pump
  • V mat and Gold Stop mat

A mini recirculating sluice kit with matting included for home use.

See it on Amazon

Pros

  • Matting included
  • Recirculating pump included
  • Small footprint for indoor use

Cons

  • Narrow 4 in width
  • Best for small batches only

Careland suits buyers who want matting included in the box.

This mini sluice measures 24 x 4 inches and includes a recirculating pump, a V mat and a Gold Stop mat.

The mats give you a trapping surface right away, with no extra purchase needed.

The 110V submersible pump and recirculating design suit home use where you run water from a tote back to the box.

At 2 lb and floor mount style, it sets up quickly for small sessions.

The narrow 4 inch width keeps water speed manageable at low flow, which helps with fine gold.

Martin Prospecting is listed as the manufacturer, and the electric power source is corded.

Trade-off: width and volume are small, so throughput is limited compared with a full size sluice box with pump.

For larger loads, compare a best large sluice box before you buy.

Careland Mini Sluice BoxCheck it on Amazon
9

FILTERUP 1100 GPH Boat Bilge Water Pump: Best 12V pump with hose kit

FILTERUP 1100 GPH Boat Bilge Water Pump, sluice box pump
7.9/10Our score
  • 1100 GPH
  • 12V
  • 1-1/8 in hose kit
  • Includes clamps and thru-hull fitting

A 12V bilge pump sold with hose, clamps and fittings for quick hookup.

See it on Amazon

Pros

  • Hose and fittings included
  • 12V for battery use
  • Compact bilge size

Cons

  • 1100 GPH limits large boxes
  • Kit fittings are aimed at marine use

FILTERUP suits buyers who want hose and fittings in the same box.

This 1100 GPH 12V bilge pump ships as a plumbing kit with 6 ft of 1-1/8 inch hose, 2 clamps, a thru-hull connector and instructions.

You can hook it to a tote and a box with less guesswork.

The pump runs on 12V DC and is built for harsh marine conditions, which suits long days in a recirculating tote.

The plastic body resists corrosion in mineral laden water.

For sluice use, the included hose length matters.

Six feet may be short for a tall feed head, so plan on extra hose if your box sits high.

The clamps and connector still save a separate fittings trip.

Trade-off: the kit is aimed at boats, so some parts will be extra for panning use.

Flow is also capped at 1100 GPH, which limits box size.

Choose it for convenience, not for maximum flow.

FILTERUP 1100 GPH Boat Bilge Water PumpCheck it on Amazon

Best sluice box pump flow for your box size

Match flow to box width first, then adjust with a valve.

A narrow mini box needs far less water than a wide full size sluice.

Small mini boxes around 4 to 6 inches wide work well with 200 to 500 GPH.

At that width, even a small bilge pump can flood the matting if you open the valve fully.

Start low and raise flow until sand clears without a rooster tail of spray.

Mid size boxes around 10 to 12 inches wide usually need 500 to 1,100 GPH.

This is the sweet spot for 12V bilge pumps.

Water should move in a steady sheet across the matting, with riffles breaking the surface in a clear pattern.

Large boxes 12 inches wide and longer need 1,500 GPH or more.

A 1100 GPH bilge pump will run, but it will take longer to reach full speed and may leave sand packed behind riffles.

That is where a sump pump or trash pump earns its place.

How flow affects gold recovery

Water speed decides what stays and what leaves.

Faster water clears sand and clay, but it also carries fine gold farther down the box.

Slower water traps more fine gold, but sand can pack the matting and hide the gold that did trap.

For fine gold, run the lowest flow that still clears light sand.

For coarse gold and heavy black sand loads, run faster and clean the box more often.

Our best sluice box matting guide explains how matting choice changes the flow you need.

Lift and hose length

Lift means vertical height, not total hose length.

A pump rated for 13 ft of lift will still push water through a longer horizontal hose, but flow drops as total resistance grows.

Keep the feed head low and the hose run short when you can.

How we compared these pumps

We compared specs, not hands on use.

We checked flow rate, lift, power source, outlet size and weight for each pump, then matched those numbers to common sluice sizes.

We grouped the picks by power first, because that decision is hard to change later.

AC pumps suit fixed sites.

DC pumps suit battery work.

Manual pumps suit backup and utility tasks.

Pressure pumps suit spraying, not high volume sluicing.

We also checked what each pump includes.

A pump with hose adapters saves a fittings trip.

A pump with no hose at all needs a full hookup kit before it can run.

Buyer patterns helped us rank within each group.

Pumps with fewer clog reports and clearer warranty terms ranked higher, even when flow was equal.

Our score weighs specs, features and buyer feedback against what you are shopping for.

That is why a lower flow pump with a warranty can outrank a higher flow pump with no stated support.

What power source should a sluice box pump use?

Choose AC for fixed sites and 12V DC for remote work.

Power decides where you can run the pump, not just how fast it goes.

110V and 115V AC pumps

AC sump and trash pumps give you the highest flow and lift in this group.

They suit car camp, garage and home setups with a close outlet.

You will need a cord that reaches the tote, plus adapters for your hose size.

The AQUASTRONG and Tsurumi both run on 115V AC.

That makes them natural picks for a sluice box with pump setup at a base camp.

12V DC bilge pumps

12V bilge pumps run from a car battery, deep cycle battery or solar charge setup.

They are light, quiet and easy to move between totes.

Flow is lower, so match them to small and mid size boxes.

The MAXZONE, SEAFLO and FILTERUP all use 12V DC with a 1-1/8 inch outlet.

That shared outlet size makes fittings and replacement hose easy to find.

Manual and pressure pumps

A hand pump needs no power at all, but it cannot sustain sluice flow.

A pressure pump gives high pressure at low volume, which suits spray bars and classifiers.

Neither replaces a submersible pump for a running sluice.

How do I set up a recirculating sluice box pump?

Place the pump in a lower tote, feed the top of the box, and let water return by gravity.

That simple loop is the core of any recirculating setup.

Tote, box and feed head

Set the tote on the ground and the sluice box raised at the head, with the tail lower.

Run hose from the pump up to a feed head or splitter at the top of the box.

Water then runs down the box and back into the tote.

Level matters for speed.

A steeper angle gives faster water at the same flow.

A shallower angle slows water down for fine gold.

Adjust leg height or a shim under the head to find the speed your matting likes.

Fittings and hose size

Match hose to the pump outlet first.

A 1-1/8 inch bilge outlet fits standard bilge hose.

A 1-1/4 inch sump outlet needs the adapters included with the pump, or a reducer you buy separately.

Check your pump outlet before you buy hose.

Our best sluice box parts guide covers hoses, clamps and splitters that fit common pump sizes.

Priming and first run

Submersible pumps prime themselves when they sit in water.

Bilge pumps do the same when fully submerged.

A pressure pump needs a full water line to self-prime, so fill the hose before the first run.

Run the system with clean water first.

Watch the sheet of water across the matting.

You want even coverage with no dry spots and no violent spray at the head.

How do I keep pump flow steady all day?

Keep the intake clear, the tote full and the hose free of kinks.

Most flow problems trace back to one of those three.

Intake screens and debris

Sand and leaves will find your intake.

A simple screen or mesh around the pump helps, but check it every few hours.

The Tsurumi trash pump handles more debris by design, while bilge pumps need cleaner water.

Clean the strainer base on the SEAFLO by snapping it off, as SEAFLO describes.

On other pumps, lift the pump out and rinse the intake before you restart.

Battery and cord care

12V pumps draw current all day, so watch battery charge as well as water level.

A pump that slows as the battery drops will change your water speed without any change in settings.

AC pumps need dry cord connections.

Keep plugs off the ground and out of the tote.

A ground fault outlet adds safety around water and electricity.

Adjusting with a valve

A valve on the feed line is the cheapest way to tune flow.

Start with the valve open, then close it a little until water speed matches your matting.

The valve on the Martin mini sluice does exactly this job.

Which riffles and legs work with a pump fed sluice?

Riffles, matting and legs decide how pump flow turns into trapping.

The pump only sets water speed.

The box hardware decides what that speed does.

Riffles and flow pattern

Riffle shape breaks the water sheet into small eddies that drop heavy material.

Flip riffles, Hungarian riffles and expanded metal each create a different pattern at the same flow rate.

Our sluice box riffles designs guide compares those patterns in detail.

If sand packs behind your riffles, raise flow a little or change riffle spacing.

If fine gold washes out, lower flow or add matting with a finer trap.

Legs and setup height

Legs set your angle and your feed head height.

Taller legs give you more lift work for the pump.

Shorter legs keep lift low and flow high.

Our keene sluice box legs guide helps you match leg height to pump lift.

What is a metal detector control box?

A control box is the electronics housing on a metal detector, not part of a sluice setup.

It holds the circuit that processes signals from the search coil.

Our guide What Is a Metal Detector Control Box? A Simple Guide explains how it works if you use a detector alongside panning.

When should I upgrade from a bilge pump to a sump pump?

Upgrade when sand packs your matting or your box takes too long to reach full speed.

Those are the two clear signs that flow is too low for your box.

Bilge pumps at 1100 GPH are fine for mini and mid size boxes.

If you move to a wider box, add a spray bar or lengthen your hose, flow demand rises fast.

A sump pump at 4500 GPH gives you margin to open a valve and clear sand without a full rebuild.

Also upgrade when lift becomes a problem.

If your feed head sits high and water barely reaches the top, a pump with 30 ft of lift will outperform a 13 ft bilge pump even at the same flow rating.

Verdict: which best sluice box pump should you buy?

Pick the AQUASTRONG for large AC powered recirculating setups, a 12V bilge pump for battery work, and a mini kit if you want everything in one box.

Match power first, then flow, then box size.

For a full size sluice box with pump at car camp, the AQUASTRONG 1 HP Sump Pump 4500 GPH gives you the most headroom.

For remote battery work, the SEAFLO or MAXZONE 1100 GPH pumps keep a mid size box running with simple fittings.

For home fine gold work, the Martin or Careland mini kits give you pump and box together.

Start with the pump that fits your power source today.

You can always add a bigger pump later, but you cannot run an AC pump from a creek with no outlet.

The best sluice box pump is the one that runs where you pan, at the flow your box needs.

Our top 3 picks at a glance

  1. 1 AQUASTRONG 1 HP Sump Pump 4500 GPH
    Best for large recirculating setups

    AQUASTRONG 1 HP Sump Pump 4500 GPH

    9.7/10 our score

    See it on Amazon
  2. 2 MAXZONE Submersible Boat Bilge Water Pump 12v
    Best for 12V battery setups

    MAXZONE Submersible Boat Bilge Water Pump 12v

    9.6/10 our score

    See it on Amazon
  3. 3 SEAFLO 01 Series 1100 GPH Bilge Pump
    Best for reliable 12V flow

    SEAFLO 01 Series 1100 GPH Bilge Pump

    9.4/10 our score

    See it on Amazon

Frequently asked questions

What flow rate does a sluice box pump need?

Most small recirculating setups work with 500 to 1,100 GPH, while larger boxes need 2,000 GPH or more. Match flow to box width and matting, then adjust with a valve so water moves fast enough to clear light material without washing gold out.

Can a 12V bilge pump run a sluice box?

Yes, a 12V bilge pump at 1,100 GPH is a common choice for a small to mid size recirculating box. It needs a 12V battery, wiring and a hose that fits its 1-1/8 inch outlet.

How much lift does a sluice box pump need?

Lift is the vertical height the pump must push water. Most home setups need only a few feet of lift, so a pump rated for 13 to 15 feet gives margin for hose routing and a raised feed head.

Do I need a trash pump for gold panning?

A trash pump helps when your feed water carries sand and solids that would clog a standard impeller. For clean recirculating water, a standard submersible or bilge pump is usually enough.

What is a recirculating sluice box pump setup?

The pump sits in a lower tote or pond and pushes water back to the top of the sluice. Water runs down the box, collects in the tote and is pumped again, so you need far less fresh water.