9 Best Waterproof Metal Detector Pinpointers (October 2026)
The best waterproof metal detector pinpointers include the Minelab PRO-FIND 35 Waterproof Pinpointer Metal Detector for sorting iron from finds, the NOKTA AccuPOINT Metal Detector Pinpointer for visible settings, and the DR.ÖTEK Metal Detector Pinpointer for an LCD and simple alerts.
On this page (5 sections)
The best waterproof metal detector pinpointer for most wet-hole searches is the Minelab PRO-FIND 35, with waterproofing up to 10 ft (3 m), adjustable sensitivity and ferrous Tone ID. For deeper underwater recovery, the Nokta PulseDive is rated up to 60 m (200 ft).
A waterproof metal detector pinpointer helps narrow down a target after your main detector signals. The right choice depends on whether you search wet soil, stream edges or underwater, and on whether you want a display, tone options or a deeper submersion rating.
A pinpointer complements your main detector. If you are also choosing a coil for that detector, compare metal detector search coils.
Learn what a pinpointer is and what it does before choosing one, and match the tool to the water depth you expect to search.
Our picks at a glance
-
1
Best for sorting iron from findsMinelab PRO-FIND 35 Waterproof Pinpointer Metal Detector
9.6/10 our score
See it on Amazon -
2
Best for visible settingsNOKTA AccuPOINT Metal Detector Pinpointer
9.5/10 our score
See it on Amazon -
3
Best for an LCD and simple alertsDR.ÖTEK Metal Detector Pinpointer
9.5/10 our score
See it on Amazon
- 4
Check itSUNPOW Metal Detector Pinpointer for Adults
Best for basic wet-sand searches - 5
Check itNokta PulseDive Underwater Metal Detector
Best for deeper underwater recovery - 6
Check itLAFMATE 2-in-1 Metal Detector Pinpointer with Digging
Best for carrying a digging tool - 7
Check itPudiBe LCD Display Fully Waterproof Pinpoint Metal
Best for checking signal strength - 8
Check itJKUSS Metal Detector Pinpointer
Best for a long claimed depth - 9
Check itGLOBALDETECTOR Fully Waterproof Portable Metal Detector Pinpointer
Best for a bright case and simple modes
How we chose waterproof metal detector pinpointers
We compared the stated water protection, controls and target feedback for each pinpointer. We gave more weight to clearly stated submersion depth when the goal is wet holes, streams or underwater recovery.
Our score weighs specs, features and buyer feedback against what you're shopping for. A rating alone cannot confirm how a pointer will perform in your soil or water, so use the depth and alert details to compare practical fit.
| Product | Best for | Water depth | Target response | Sensitivity | Our score |
|---|---|---|---|---|---|
| Minelab PRO-FIND 35 Waterproof Pinpointer Metal Detector | sorting iron from finds | Up to 10 ft (3 m) | 2 ferrous and nonferrous responses | 5 levels | 9.6 |
| NOKTA AccuPOINT Metal Detector Pinpointer | visible settings | Up to 10 ft (3 m) | 9.5 | ||
| DR.ÖTEK Metal Detector Pinpointer | an LCD and simple alerts | 9.5 | |||
| SUNPOW Metal Detector Pinpointer for Adults | basic wet-sand searches | 9.4 | |||
| Nokta PulseDive Underwater Metal Detector | deeper underwater recovery | Up to 60 m (200 ft) | 9.1 | ||
| LAFMATE 2-in-1 Metal Detector Pinpointer with Digging | carrying a digging tool | 3 levels | 9.0 | ||
| PudiBe LCD Display Fully Waterproof Pinpoint Metal | checking signal strength | 8.5 | |||
| JKUSS Metal Detector Pinpointer | a long claimed depth | 8.3 | |||
| GLOBALDETECTOR Fully Waterproof Portable Metal Detector Pinpointer | a bright case and simple modes | Up to 5 m (16.4 ft) stated | 8.0 |
The best waterproof metal detector pinpointers for wet searches
The Minelab PRO-FIND 35 is the most balanced choice for wet holes, while the Nokta PulseDive covers deeper underwater use. For another model-specific look, read the XP MI-6 pinpointer review.
The remaining picks offer different combinations of displays, alerts and digging features.
Minelab PRO-FIND 35 Waterproof Pinpointer Metal Detector: Best for sorting iron from finds
- Waterproof up to 10 ft (3 m)
- Ferrous Tone ID
- 5 sensitivity levels
- Audio and vibration alerts
The PRO-FIND 35 pairs submersion protection up to 10 ft with two responses that help separate ferrous junk from nonferrous targets. Its five sensitivity levels let you adjust for ground conditions.
Pros
- Ferrous Tone ID
- 5 sensitivity levels
- Audio and vibration alerts
Cons
- Maximum stated depth is 10 ft
- Designed for expert detectorists
The Minelab PRO-FIND 35 fits searches around riverbanks, wet soil and shallow water where you may also want help separating iron from nonferrous targets. It is waterproof up to 10 ft (3 m) and has two ferrous Tone ID responses.
Five sensitivity levels give you options for adjusting to ground conditions. As the probe approaches a target, audio tones and vibration intensify, so you can follow the change in signal.
Minelab also includes Detector Interference Free technology to reduce interference with an operating metal detector. A built-in flashlight, holster and lanyard are included.
Choose it if you want a defined depth limit and ferrous feedback in one handheld tool. For a closer look at a related Nokta model, read our Nokta AccuPOINT pinpointer review.
NOKTA AccuPOINT Metal Detector Pinpointer: Best for visible settings
- IP68 waterproof up to 10 ft (3 m)
- Color LCD
- 1-Tone, 2-Tone and Iron-Off modes
- Bluetooth audio
AccuPOINT combines submersion protection up to 10 ft with a color screen showing battery life and sensitivity. Its tone modes include Iron-Off, and alerts can use audio, vibration or both.
Pros
- Color LCD shows settings
- Bluetooth audio
- Frequency shift helps prevent interference
Cons
- Maximum stated depth is 10 ft
- More settings than a basic one-button pointer
The NOKTA AccuPOINT suits detectorists who want to see settings while searching. Its color LCD shows battery life and sensitivity level, while its IP68 rating is specified for use up to 10 ft (3 m).
Choose between 1-Tone, 2-Tone and Iron-Off. For another Nokta model, read the Nokta pinpointer review.
AccuPOINT also offers audio-only, vibration-only or combined alerts, plus volume and backlight controls.
Bluetooth audio and frequency shift add options for noisy areas or nearby detectors. If you want a model-specific assessment, see our Nokta AccuPOINT pinpointer review.
DR.ÖTEK Metal Detector Pinpointer: Best for an LCD and simple alerts
- IP68-rated waterproofing
- LCD target signal
- Audio and vibration alerts
- 360° side-scan
This DR.ÖTEK pointer pairs an LCD target signal with audio and vibration alerts. Its maker describes it as IP68-rated and fully submersible.
Pros
- LCD target signal
- Audio and vibration alerts
- One-touch signal cancellation
Cons
- No submersion depth is specified
- No selectable sensitivity levels are specified
The DR.ÖTEK pinpointer combines an LCD signal display with audio and vibration alerts. Its maker describes the device as IP68-rated and fully submersible, though no specific depth is given.
Its 360° side-scan can help sweep around the sides of a hole, while one-touch signal cancellation is meant to reduce interference. An LED light and anti-slip rubber grip are also described.
This pick makes sense if you want visual target feedback and a claimed fully waterproof design. Since a depth limit is not specified, confirm the safe immersion depth before taking it into deeper water.
SUNPOW Metal Detector Pinpointer for Adults: Best for basic wet-sand searches
- IP68 waterproof tip and scale section
- 360° side-scan
- Sound and vibration alerts
- Single-button operation
SUNPOW's OTMD12 offers simple one-button operation and 360° side-scan for wet-sand searches. Its waterproof protection covers the tip and scale section.
Pros
- Simple one-button operation
- Sound and vibration alerts
- Spring clip and belt loop included
Cons
- Waterproof area is specified as the tip and scale section
- No submersion depth is specified
SUNPOW's OTMD12 is a simple choice for wet sand and damp recovery work. It has one-button operation, 360° side-scan, and sound plus vibration alerts.
The important limit is that its waterproof protection is described for the tip and scale section. That wording is less clear than a stated full-body submersion depth, so use it according to the maker's instructions and avoid assuming it is safe for deep water.
A spring clip and belt loop are included for carrying. Choose it when you want basic alerts for beach or grass searches and do not need a display with detailed settings.
Nokta PulseDive Underwater Metal Detector: Best for deeper underwater recovery
- Waterproof up to 60 m (200 ft)
- Converts between scuba detector and pinpointer
- Lost alarm
- LED flashlight
PulseDive is the pick here for deeper underwater recovery, with a stated waterproof depth up to 60 m (200 ft). It converts between a scuba detector and a pinpointer.
Pros
- Deepest stated waterproof depth here
- Two detector configurations
- LED flashlight and lost alarm
Cons
- Larger set than a handheld pointer alone
- Designed around scuba and underwater use
The Nokta PulseDive is the clear choice for deeper underwater recovery. It is waterproof up to 60 m (200 ft) and can transform between a scuba detector and a pinpointer.
The set includes a replaceable scuba coil and a replaceable pointer coil, along with a hard-shell case, holster, lanyard and wristband. Its LED flashlight can help illuminate the search area, and a lost alarm sounds after five minutes of inactivity.
This is a larger and more specialized option than a basic handheld pinpointer. If you are comparing equipment for a full underwater setup, see our best handheld underwater metal detectors guide.
LAFMATE 2-in-1 Metal Detector Pinpointer with Digging: Best for carrying a digging tool
- IP68-rated waterproofing
- Detachable shovel
- 3 sensitivity levels
- Audio and vibration alerts
LAFMATE combines an IP68-rated pinpointer with a detachable digging shovel. It suits wet holes where you want a recovery tool attached to your detecting kit.
Pros
- Detachable shovel included
- 3 sensitivity levels
- Audio and vibration alerts
Cons
- No submersion depth is specified
- Shovel adds bulk compared with a pointer alone
LAFMATE pairs an IP68-rated pinpointer with a detachable digging shovel. That combination suits wet holes where you want a recovery tool close at hand.
The pointer has 360° detection, three sensitivity levels and audio or vibration alerts. The shovel can screw onto the opposite end of the probe or detach when you prefer to carry the tools separately.
No specific submersion depth is stated, so check the safe limit before using it underwater. For gold-focused searches, compare its general-purpose features with our best gold pinpointer picks.
PudiBe LCD Display Fully Waterproof Pinpoint Metal: Best for checking signal strength
- IP66-rated
- Backlit LCD signal display
- 3 alert modes
- 3 sensitivity levels
The PudiBe HS10 uses a backlit LCD to show signal level and battery condition. Its IP66 rating and three alert modes suit buyers who want visible feedback.
Pros
- Backlit LCD signal display
- 3 alert modes
- 3 sensitivity levels
Cons
- IP66 rather than IP68
- Depth claims are not consistent
The PudiBe HS10 makes signal strength visible on a backlit LCD, alongside battery condition. Its IP66 rating is a lower protection class than the IP68 models in this roundup.
It offers audio-only, vibration-only or combined alerts, plus three sensitivity levels. The maker describes it as fully waterproof, but the depth claims vary, so confirm the safe immersion limit before using it in a river or lake.
The bright orange color may help you keep track of the pointer near water. Pick it if the display matters more than having a clear, consistent depth specification.
JKUSS Metal Detector Pinpointer: Best for a long claimed depth
- IP68-rated probe
- LCD signal display
- 4 modes
- 360° side-scan
JKUSS describes its probe as IP68-rated and claims submersion up to 50 ft. The stated depth is a maker claim, so confirm the exact use limits before underwater recovery.
Pros
- Backlit LCD and LED light
- 360° side-scan
- Four modes
Cons
- 50 ft depth is a maker claim
- No sensitivity levels are specified
JKUSS specifies an IP68-rated probe and claims it can be submerged up to 50 ft. It also has a backlit LCD, an LED light and 360° side-scan detection.
That depth figure is a maker claim, so confirm it and the exact water-use instructions before relying on it underwater. The available details do not specify selectable sensitivity levels.
Choose it if a long claimed depth and visual target feedback fit your needs. For a more established option with a stated limit of 10 ft, compare the Minelab or AccuPOINT above.
GLOBALDETECTOR Fully Waterproof Portable Metal Detector Pinpointer: Best for a bright case and simple modes
- Orange case
- 3 alert modes
- One-button operation
- Ruler on the body
GLOBALDETECTOR pairs a bright orange body with one-button operation and three alert modes. Its stated submersion depth is up to 5 m (16.4 ft).
Pros
- Bright orange case
- One-button operation
- Holster and lanyard included
Cons
- IP rating differs between the specs and description
- Depth should be confirmed before submersion
GLOBALDETECTOR offers simple one-button controls and three alert modes: audio, vibration or both. The orange body is easy to distinguish from dark soil or gear, and a holster and lanyard are included.
Its description states submersion up to 5 m (16.4 ft), but the waterproof rating is inconsistent: the provided specifications say IP67, while the product description calls it IP68. Confirm the correct rating and battery-cover instructions before submerging it.
A ruler printed on the body can help estimate hole depth. This is a basic option if you want straightforward controls and a bright case, with careful checking before underwater use.
Which waterproof pinpointer features matter most?
A submersion depth that matches your search is the first feature to check. For wet holes and shallow stream edges, a clear 10 ft limit may be enough; for deeper recovery, the PulseDive has the deepest stated rating in this roundup.
Is a fully waterproof metal detector pinpointer better for wet holes?
A fully submersible pinpointer gives you more room to work in wet holes than a splash-resistant model. Still, check whether the rating covers the whole device, the probe only or a stated depth.
Also check the battery cover before each water search. A poor seal can undermine the protection, even when a device is described as waterproof.
Do waterproof pinpointers need a screen?
No, a screen is optional. Audio and vibration can guide you toward a target without requiring you to look down at a display.
An LCD helps when you want visible signal or battery information. AccuPOINT and PudiBe show screen information, while the Minelab relies on audio and vibration plus its ferrous responses.
Are tone modes useful around iron?
Tone modes can help you distinguish target types while narrowing down a signal. The Minelab PRO-FIND 35 has separate ferrous and nonferrous responses, and AccuPOINT offers 1-Tone, 2-Tone and Iron-Off modes.
These features can help with sorting, but they do not identify every object. Dig carefully when a target remains uncertain.
How should you use a pinpointer around water?
A pinpointer helps locate a target after the main detector signals, especially once you have exposed soil or sand. Keep the search method simple: recover a small amount of material, scan the hole and material, then narrow the target area before digging further.
For underwater work, match both the main detector and pointer to the planned depth. Our guide on whether a metal detector can detect underwater explains the difference between a land detector near water and equipment designed for submersion.
Keep your pinpointer attached with its lanyard or holster where available. This is especially useful in streams, where a dropped tool can be difficult to spot or retrieve.
If you are deciding what a signal could turn into, our guide to what you can find with a metal detector covers common finds and how search location affects them.
Which waterproof metal detector pinpointer should you choose?
Choose the Minelab PRO-FIND 35 for wet holes and shallow water when ferrous Tone ID and a defined 10 ft limit matter. Pick AccuPOINT if you want a color display and adjustable alert settings, or the PulseDive when your underwater search requires its stated 60 m depth rating.
For basic wet-sand use, SUNPOW offers one-button controls, while LAFMATE adds a detachable shovel. Confirm the exact water limits of models without a clearly specified depth before submerging them, then match the pinpointer to what your main detector can handle.
Our top 3 picks at a glance
-
1
Best for sorting iron from finds
Minelab PRO-FIND 35 Waterproof Pinpointer Metal Detector
9.6/10 our score
See it on Amazon -
2
Best for visible settings
NOKTA AccuPOINT Metal Detector Pinpointer
9.5/10 our score
See it on Amazon -
3
Best for an LCD and simple alerts
DR.ÖTEK Metal Detector Pinpointer
9.5/10 our score
See it on Amazon
Frequently asked questions
Can a waterproof pinpointer be fully submerged?
Some can, but the safe depth depends on the model. Minelab PRO-FIND 35 and Nokta AccuPOINT are rated for use up to 10 ft (3 m), while Nokta PulseDive is rated up to 60 m (200 ft).
Check the model's stated limit and make sure its battery cover is sealed before submerging it.
What is the difference between water-resistant and submersible?
Water-resistant designs may handle rain or splashes without being safe to submerge. A submersible pinpointer has a stated underwater depth or rating for full immersion.
Check which parts are protected, too.
SUNPOW specifies waterproof protection for the tip and scale section.
Do I need a pinpointer for underwater metal detecting?
A pinpointer can help narrow down a target in a hole or scoop after your main detector signals. For deep underwater work, choose a tool with a depth rating that fits the planned dive.
Our guide to detecting underwater covers the role of your main detector and water conditions.
Can I use a land pinpointer in a stream?
Only if its waterproof rating and depth limit cover the way you plan to use it. For stream edges and wet holes, a pointer rated for submersion can reduce concern about splashes and shallow immersion.
For a separate handheld detector made for underwater searching, see our guide to the best handheld underwater metal detector.
