9 Best High Frequency Metal Detectors (November 2026)
The best high frequency metal detectors include the DR.ÖTEK Metal Detector for Adults for beginners on a budget, the MINELAB X-Terra PRO All-Terrain Professional Fully Waterproof for all terrain switching, and the SAKOBS Metal Detector for Adults for portable beach hunts.
On this page (9 sections)
- The high frequency metal detectors we compared, ranked
- High frequency vs multi frequency metal detectors: which should you buy?
- How we compared these high frequency metal detectors
- What is a high frequency metal detector and why does it help with small gold?
- How do I choose a type of metal detector for gold, coins or beach hunts?
- What is the best metal detector frequency for coins, jewelry and relics?
- What can you find with a high frequency metal detector?
- How do I set up and care for a high frequency metal detector?
- Our verdict on the best high frequency metal detectors
The best high frequency metal detectors for fine gold are the 18.75 to 19.23 kHz models, because they respond to small low conductivity targets that lower frequencies can miss. For general treasure hunting, the DR.ÖTEK and MINELAB X-Terra PRO score higher for ease and terrain handling.
High frequency does not mean better for everything. It means sharper response to small gold, thin coins and small jewelry.
Deep relics, large silver and bulk trash rejection often favor lower or multiple frequencies.
Our score weighs specs, features and buyer feedback against what you're shopping for. We have not hands on tested these models.
We compared published frequencies, coil sizes, waterproof ratings and modes, and we flag where a depth claim depends on target size or soil.
Our picks at a glance
-
1
-
2
Best for all terrain switchingMINELAB X-Terra PRO All-Terrain Professional Fully Waterproof
9.6/10 our score
See it on Amazon -
3
- 4
Check itikiu 2026 Latest Higher Accuracy Professional Metal
Best for simple accuracy controls - 5
Check itSUNPOW Professional Metal Detector for Adults
Best for low light hunting - 6
Check ithazlewolke TX-850 PRO Metal Detector for Adults
Best for small gold targets - 7
Check itxiutantxmd PRO-Z60 Metal Detector for Adults 16"
Best for high frequency depth claims - 8
Check itCKG Treon Professional Metal Detector for Adults
Best for long waterproof prospecting - 9
Check itMINELAB Vanquish 340 Multi-Frequency Metal Detector
Best for automatic multi frequency ease
The high frequency metal detectors we compared, ranked
The top three true high frequency picks are the TX-850 PRO, PRO-Z60 and CKG Treon. The higher scoring general models follow because they are easier for most beginners.
DR.ÖTEK Metal Detector for Adults: Best for beginners on a budget
- 7 kHz operating frequency
- 10 in IP68 waterproof search coil
- Five modes including Jewelry and Pinpoint
- Larger LCD display with backlight
A beginner friendly kit with a waterproof coil and clear display for coins, gold and beach hunting.
Pros
- Waterproof 10 in coil for beach and shallow water
- Five modes suit different targets
- Complete kit with headphones, shovel and bag
Cons
- 7 kHz is not a true high frequency for fine gold
- Control box is not waterproof
DR.ÖTEK suits beginners who want a complete kit without learning frequency choices first. Its 7 kHz frequency is not a true high frequency for fine gold, so set expectations for nuggets.
It is still aimed at gold, silver, coins and copper in parks and on beaches.
The 10 inch IP68 coil covers more ground than a small coil and works in shallow water, wet sand and rain. The control box is not waterproof, so keep it dry even in seawater, where DR.ÖTEK advises lower sensitivity to cut interference.
Five modes help you move from All Metal to Jewelry, DISC, Memory and Pinpoint as you learn. The larger backlit LCD shows metal type, depth, sensitivity, mode and battery at a glance.
The stem adjusts from 42.7 to 53.5 inches and the unit weighs 2.2 pounds.
Trade off: you get ease and a full kit, but not the fine gold sensitivity of the 19.23 kHz models. If tiny nuggets are the goal, choose a true high frequency model below.
MINELAB X-Terra PRO All-Terrain Professional Fully Waterproof: Best for all terrain switching
- PRO-SWITCH frequency switching
- IP68 waterproof to 16 ft
- Park, Field and Beach search modes
- 30 discrimination segments
A fully waterproof Minelab with switchable frequencies and terrain modes for parks, fields and beaches.
Pros
- Fully waterproof to 16 ft
- Six preprogrammed terrain modes
- Pinpoint mode for smaller holes
Cons
- 7.69 kHz base frequency is lower than dedicated gold models
- Heavier than some compact picks
MINELAB X-Terra PRO suits hunters who change ground often and want terrain modes instead of manual tuning. Its PRO-SWITCH engine lets you switch frequencies, with Park, Field and Beach modes across six preprogrammed options.
That helps in parks, fields and wet sand.
It is fully IP68 waterproof to 16 ft, unlike models where only the coil is waterproof. That matters for shallow water and beach work.
The 12 inch coil, 30 discrimination segments and pinpoint mode help you dig smaller holes.
You get backlit controls, handgrip vibration and a control pod flashlight for low light hunts. It weighs 2.9 pounds and packs to 25 inches.
Trade off: the 7.69 kHz base frequency is lower than dedicated gold models, so tiny gold response will not match the TX-850 PRO.
SAKOBS Metal Detector for Adults: Best for portable beach hunts
- 9 kHz operating frequency
- 11 in IP68 DD coil
- Four search modes
- Foldable design with carrying backpack
A foldable beach detector with an 11 in DD coil and a complete carry kit for travel.
Pros
- Foldable and light for travel
- 11 in IP68 DD coil
- Kit includes headphones, shovel and backpack
Cons
- 9 kHz will miss the finest gold response
- Depth claims depend on target and soil
SAKOBS suits adults who travel to beaches and want a foldable detector that packs small. It adjusts from 26 to 47 inches, weighs 2.7 pounds and folds for backpack carry.
The kit includes headphones, a digging shovel and a carrying backpack.
Its 11 inch IP68 DD coil suits beach hunting, wet sand, shallow water and riverbanks. The DD design helps cover ground efficiently.
Four modes, All Metal, Disc, Jewelry and Pinpointer, plus a backlit LCD target ID display, keep operation simple.
SAKOBS says detection reaches up to 12.8 inches under suitable conditions for coins, jewelry and relics. Treat depth as target and soil dependent.
The 9 kHz frequency is mid range, not a true high frequency for fine gold.
Trade off: portability and a complete kit beat dedicated gold sensitivity. Choose it for travel and beach fun, not for prospecting tiny nuggets.
ikiu 2026 Latest Higher Accuracy Professional Metal: Best for simple accuracy controls
- DSP chip with adjustable sensitivity
- IP68 waterproof search coil
- Four modes including Notch and Memory
- Lightweight at 2.26 pounds
A lightweight detector with five sensitivity levels and four modes for yards, parks and beaches.
Pros
- Five sensitivity levels help cut false signals
- IP68 coil for wet ground
- Assembles in less than a minute
Cons
- Controller is not waterproof
- No published high frequency for fine gold
ikiu suits buyers who want simple sensitivity control and low arm fatigue. It weighs 2.26 pounds, adjusts from 36.6 to 47 inches and assembles in less than a minute without tools.
The stem and handle are aimed at adults and children of different heights.
Its DSP chip supports detection up to 10 inches deep for gold, silver, coins and jewelry. Sensitivity adjusts from 1 to 5 levels to reduce false alarms.
Four modes, All Metal, Notch, Memory and PinPoint, cover yards, parks, walls, sand and grass.
The IP68 waterproof search coil suits beach, river and rainy use. The controller is not waterproof, so keep it out of the water.
The large backlit LCD helps in daylight and at night.
Trade off: no published high frequency for fine gold, so it is a general accuracy pick rather than a prospecting pick. It wins on lightness and simple controls.
SUNPOW Professional Metal Detector for Adults: Best for low light hunting
- 12 in IP68 waterproof coil
- Two backlit LCD screens
- Five detection modes
- Adjustable from 19 to 59 inches
A light detector with twin backlit displays and a wide height range for beach, field and garden use.
Pros
- 12 in waterproof coil
- Twin backlit LCDs for low light
- Adjusts from 19 to 59 inches
Cons
- Control box is not waterproof
- No published high frequency for fine gold
SUNPOW suits hunters who detect at dawn, dusk or at night and need clear readouts. Its two backlit LCD screens and symmetrical handle help you see target data without turning your wrist.
It adjusts from 19 to 59 inches at all connection points.
The 12 inch IP68 waterproof coil works on sandy beaches, in forests and in shallow water. The control box is not waterproof.
Five detection modes let you tune the hunt, and SUNPOW says small pieces like coins and gold nuggets can be found at depths up to 4 inches and beyond.
It weighs 2 pounds and folds down for transport. Two 9V batteries are included, so you can start after unboxing.
The quick lock design and spiral structure speed setup.
Trade off: SUNPOW does not publish a high frequency for fine gold, so do not expect 19 kHz style response. Choose it for low light ease and a large coil.
hazlewolke TX-850 PRO Metal Detector for Adults: Best for small gold targets
- 19.23 kHz high frequency
- Manual and auto ground balance
- 13 in waterproof DD coil
- All-Metal, Discrimination and Pinpoint modes
A true high frequency gold detector with ground balance for mineralized soil and small low conductivity targets.
Pros
- 19.23 kHz suits gold nuggets and small coins
- Manual and auto ground balance
- 13 in waterproof DD coil
Cons
- Heavier than compact models
- High frequency is less ideal for deep large targets
TX-850 PRO is the clearest true high frequency pick in this guide. It runs at 19.23 kHz, tuned for small low conductivity metals like gold nuggets, coins and relics.
That frequency is the main reason to choose it over general models.
Manual and auto ground balance help in black sand, clay and rocky terrain and in highly mineralized soils. The Fe3O4 display graphic shows mineralization, while GND PHASE and GND BAL readings help you balance the ground.
That matters because high frequency detectors can chatter in hot soil without balance.
The 13 inch waterproof DD coil gives wide coverage for fields, forests, shallow streams and beaches. Three modes, All Metal, Discrimination and Pinpoint, cover trash filtering and precise location.
It weighs 3.5 pounds in the bullets and collapses to 18.5 inches.
Trade off: it is heavier and high frequency is less ideal for deep large targets. For fine gold, it is the first model to consider.
xiutantxmd PRO-Z60 Metal Detector for Adults 16": Best for high frequency depth claims
- 19.23 kHz high frequency
- Double-D waterproof coil
- Ground balance technology
- Backlit large LCD screen
A 19.23 kHz detector tuned for tiny gold and thin coins, with a full gift kit and pinpointer.
Pros
- 19.23 kHz for small targets
- DD waterproof coil
- Kit includes pinpointer, headphones and backpack
Cons
- Main unit is not waterproof
- Depth claims depend heavily on target size
PRO-Z60 suits hunters who want 19.23 kHz tuning with a full kit. It is tuned to 19.23 kHz for small low conductivity targets such as gold nuggets and loose coins.
Ground balance helps in sand, black soil and rocky terrain.
Xiutantxmd says it can pinpoint a quarter at 16 inches and claims a 6 foot maximum depth. Treat those numbers as target dependent.
A coin, a phone and a large aluminum plate all give very different signals at depth.
The DD waterproof coil suits gravelly soil, wooded fields, backyards and shallow water. The coil and wires are waterproof, but the main unit and connection port are not.
Do not immerse the main unit below the connection port.
The kit includes a handheld pinpointer with holster, headphones, backpack, digging shovel and two batteries. The stem adjusts from 25 to 53 inches and collapses to 27 inches.
Trade off: depth claims need a reality check, but the frequency and kit are strong.
CKG Treon Professional Metal Detector for Adults: Best for long waterproof prospecting
- 18.75 kHz high frequency
- Fully waterproof IP68 to 16 ft
- 11 in DD coil
- Treasure, Prospecting, All Metal and Pinpointer modes
A fully waterproof 18.75 kHz prospecting detector with long battery life for beach and shallow water.
Pros
- 18.75 kHz for small gold and jewelry
- Fully waterproof to 16 ft
- Up to 20 hours of use
Cons
- Performs worse in wet salty sand and saltwater
- Single frequency only
CKG Treon suits prospectors who want a fully waterproof high frequency detector for long sessions. It runs at a single 18.75 kHz frequency, which improves sensitivity to small gold, coins and jewelry.
CKG says depth reaches up to 2 meters, so treat that as a best case claim by target and soil.
Four modes cover Coin and Treasure, Prospecting, All Metal and Pinpointer. That split helps you move from general treasure hunting to prospecting to precise location.
Personal settings let you tune sensitivity, tones, ground balance and discrimination.
The IP68 fully waterproof design and 11 inch DD coil suit beach, sand, soil and shallow water up to 16 ft. The 2500 mAh lithium polymer battery gives up to 20 hours of use.
That battery life is a real advantage for long beach days.
Trade off: CKG says it performs worse in wet salty sand and saltwater, and it is a single frequency model. For dry sand, freshwater and trashy parks, it is a strong prospecting choice.
MINELAB Vanquish 340 Multi-Frequency Metal Detector: Best for automatic multi frequency ease
- Simultaneous Multi-Frequency with 5 frequencies at once
- Waterproof coil
- Park, Field and Beach modes
- Lightweight at 2.6 pounds
A turn on and go multi frequency detector that auto selects settings for parks, fields and beaches.
Pros
- Multi-IQ uses 5 frequencies at once
- No frequency or ground balance choices needed
- Collapsible for travel
Cons
- Not a dedicated high frequency gold detector
- Interface is water resistant, coil is waterproof
Vanquish 340 suits hunters who do not want to choose frequencies or ground balance. Its Simultaneous Multi-Frequency system uses 5 frequencies at once, so you can search many metals and soils with one detector.
That is a different path from a single 19 kHz prospecting frequency.
Turn on and go operation auto selects settings by soil. Park, Field and Beach modes each offer Coin, Jewelry and All-Metal options.
Automatic noise canceling and lag free audio help you hear targets clearly.
It weighs 2.6 pounds and packs to 30 inches with a collapsible snap lock system. The coil is waterproof and the interface is water resistant.
That distinction matters if you hunt in shallow water.
Trade off: it is not a dedicated high frequency gold detector, so fine gold response will not match the TX-850 PRO, PRO-Z60 or Treon. It wins on ease for mixed coin, jewelry and relic hunting.
High frequency vs multi frequency metal detectors: which should you buy?
Choose high frequency if small gold is your main target and you will learn ground balance. Choose multi frequency if you want automatic handling for coins, jewelry and relics in many soils.
Our guide to multi frequency vs single metal detectors explains the full trade off in plain terms.
A single high frequency model gives you one sharp tool. That sharpness helps with nuggets and thin coins, but it can narrow your range for deep silver and large relics.
A multi frequency model spreads its work across several frequencies at once.
For beginners, that automatic spread often means fewer missed targets and less manual tuning. For prospectors, a dedicated 18.75 or 19.23 kHz model often means better response to the smallest gold.
Neither choice is wrong. Your main target decides it.
| Product | Best for | Operating frequency | Search coil size | Weight | Our score |
|---|---|---|---|---|---|
| DR.ÖTEK Metal Detector for Adults | beginners on a budget | 7 KHz | 9.8 inches | 2.2 pounds | 9.7 |
| MINELAB X-Terra PRO All-Terrain Professional Fully Waterproof | all terrain switching | 7.69 KHz | 12 inches | 2.9 pounds | 9.6 |
| SAKOBS Metal Detector for Adults | portable beach hunts | 9 KHz | 11 inches | 2.7 pounds | 9.5 |
| ikiu 2026 Latest Higher Accuracy Professional Metal | simple accuracy controls | 10 inches | 2.26 pounds | 9.3 | |
| SUNPOW Professional Metal Detector for Adults | low light hunting | 12 inches | 2 pounds | 8.9 | |
| hazlewolke TX-850 PRO Metal Detector for Adults | small gold targets | 19.23 kHz | 13 inches | 3.5 pounds | 8.9 |
| xiutantxmd PRO-Z60 Metal Detector for Adults 16" | high frequency depth claims | 19.2 KHz | 12 inches | 2.6 pounds | 8.7 |
| CKG Treon Professional Metal Detector for Adults | long waterproof prospecting | 18.75 kHz | 11 inches | 8.7 | |
| MINELAB Vanquish 340 Multi-Frequency Metal Detector | automatic multi frequency ease | 10 KHz | 2.6 pounds | 8.6 |
How we compared these high frequency metal detectors
We compared published frequency first, then coil size, waterproof rating, ground balance and modes. Frequency decides fine gold response, so 19.23 and 18.75 kHz models rank highest for that job.
We then checked how each model handles beaches, mineralized soil and low light.
We also compared weight, collapsed length and kit contents. A detector you will carry every weekend beats a heavier model you leave at home.
Kit items like a pinpointer, headphones and shovel affect first hunt cost and ease.
We did not test these detectors ourselves. We relied on published specs and buyer patterns, and we label maker depth claims as claims.
Depth always depends on target size, shape, soil and coil height.
Our metal detector frequency chart helps you see where each frequency fits. Use it before you shop if you are new to frequency choices.
What is a high frequency metal detector and why does it help with small gold?
A high frequency metal detector uses a higher kHz signal that responds more strongly to small, low conductivity targets. Gold nuggets, thin coins and small jewelry are in that group.
Lower frequencies tend to favor larger, high conductivity targets.
That is why the TX-850 PRO and PRO-Z60 run at 19.23 kHz and the Treon runs at 18.75 kHz. Those frequencies do not make gold appear from nowhere.
They make small gold more likely to give a clear signal.
High frequency also makes ground mineralization more obvious. That is why ground balance matters so much on prospecting models.
Without balance, hot soil can mask small targets or create false signals.
If you are unsure what you will hunt most, start with our What Is a Metal Detector Used For? The Basics guide.
It links your targets to the right detector type.
How do I choose a type of metal detector for gold, coins or beach hunts?
Start with your main target, not with the highest score. Gold prospecting points to 18 to 20 kHz models with ground balance.
Coin and jewelry hunting in parks points to multi frequency or switchable frequency models.
Beach hunting points to waterproof coils and salt tolerance. Park hunting points to discrimination and trash rejection.
Field and relic hunting points to depth and ground handling. A type of metal detector guide can help you match the job to the design.
Our picks show that split clearly. The TX-850 PRO, PRO-Z60 and Treon are prospecting first.
The X-Terra PRO and Vanquish 340 are terrain and ease first. The DR.ÖTEK, SAKOBS, ikiu and SUNPOW models are beginner and budget first.
What should beginners choose first?
Beginners should choose ease over peak frequency unless they already hunt gold. A backlit display, preset modes and a waterproof coil matter more on your first hunts.
The DR.ÖTEK and SAKOBS kits cover that need well.
What should prospectors choose first?
Prospectors should choose frequency and ground balance first. Look for 18.75 kHz or higher, manual and auto ground balance, and a DD coil.
The TX-850 PRO gives you all three in one model.
What is the best metal detector frequency for coins, jewelry and relics?
Coins and jewelry often sit in the middle. Many hunters use mid frequencies for general coin work and higher frequencies for thin coins and small gold jewelry.
The best metal detector frequency for coins guide maps that middle ground.
Relics are less predictable. Size, shape and soil change the signal more than brand names do.
A larger relic can respond well at a lower frequency, while a thin coin may need a higher one.
That is why multi frequency models appeal to coin hunters. They do not force you to pick one frequency for every target.
The Vanquish 340 uses five frequencies at once for that reason.
For pure coin shooting in trashy parks, discrimination and target separation may matter more than peak frequency. High frequency alone will not sort trash for you.
What can you find with a high frequency metal detector?
You can find coins, jewelry, gold nuggets, small artifacts and lost rings with a high frequency detector. Our guide to What Can You Find With a Metal Detector? covers the usual finds by place, from parks to beaches to old yards.
Small gold is the headline find. Flat, thin and tiny pieces that other detectors miss can give a usable signal at 18 to 20 kHz.
That includes small nuggets, thin chains and small earrings.
You will also find trash. Nails, foil, pull tabs and bottle caps still signal, even at high frequency.
Discrimination and pinpoint modes help you dig less trash, but no detector removes trash completely.
Depth still follows physics. A tiny nugget at 10 inches is a much weaker signal than a large coin at the same depth.
Keep your coil low and your sweep slow.
How do I set up and care for a high frequency metal detector?
Start with ground balance where your model offers it. Run auto balance in the same soil you will hunt, then check manual balance if signals stay noisy.
Mineralized soil, black sand and salt sand each need a different balance point.
Next, set sensitivity for the ground, not for the brochure. Lower sensitivity often quiets salt noise and hot soil.
Higher sensitivity can help in clean, mild soil, but it can also raise false signals.
Keep the coil clean and dry after wet hunts. Even waterproof coils benefit from a rinse and air dry.
Keep control boxes dry unless the model is fully waterproof, and store the detector collapsed if it folds.
If you move from a detector to other outdoor finds, our best strongest magnet for magnet fishing guide covers a different way to hunt iron and steel in water.
Our verdict on the best high frequency metal detectors
Pick the hazlewolke TX-850 PRO if fine gold is your main goal, because its 19.23 kHz frequency and ground balance directly target small nuggets. Pick the PRO-Z60 if you want the same frequency with a pinpointer kit.
Pick the CKG Treon if you want full waterproofing and long battery life.
Pick the DR.ÖTEK if you are a beginner who wants a complete kit and a clear display. Pick the MINELAB X-Terra PRO if you hunt many terrains and want frequency switching.
Pick the Vanquish 340 if you want multi frequency ease over dedicated gold tuning.
For most buyers, the right high frequency metal detector is the one tied to your main target. Gold first means 18.75 kHz or higher.
General treasure first means ease, waterproofing and modes. Start with the frequency chart, then match the model to your ground.
Our top 3 picks at a glance
-
1
-
2
Best for all terrain switchingMINELAB X-Terra PRO All-Terrain Professional Fully Waterproof
9.6/10 our score
See it on Amazon -
3
Frequently asked questions
What frequency is best for gold with a metal detector?
Higher frequencies around 18 to 20 kHz respond better to small gold nuggets and thin jewelry. The TX-850 PRO and PRO-Z60 run at 19.23 kHz, while the CKG Treon runs at 18.75 kHz.
Lower frequencies still find larger gold pieces, but they miss finer targets more often.
Are high frequency metal detectors good for coins?
Yes, high frequency models often give a stronger signal on small coins and thin coins. The 19.23 kHz models in this guide are tuned for small low conductivity targets.
For mixed coin and relic hunting in trashy ground, a multi frequency model may be easier.
Can a high frequency detector work on a saltwater beach?
Some can, with ground balance and lower sensitivity to control salt noise. Hazlewolke says the TX-850 PRO ground balance range includes saltwater settings.
CKG says the Treon performs worse in wet salty sand, so check conditions before you buy.
Should I choose high frequency or multi frequency?
Choose high frequency if fine gold and small targets are your main goal. Choose multi frequency if you want one detector to handle coins, jewelry and relics in many soils without manual frequency choices.
Our multi frequency vs single metal detectors guide breaks down the trade off.
About this guide: Our look at high frequency metal detectors draws on maker specs, materials and what owners report. See how we research.



