Buying guide

Waterproof Metal Detectors Buying Guide

Updated on · By the Metal Detector Help team

The right waterproof metal detector depends on how deep you plan to search: choose a waterproof coil for wet ground and shallow water, or a submersible pinpointer for underwater target recovery. Check the protection rating, depth limit and saltwater guidance before you buy.

On this page (9 sections)
  1. Waterproof Metal Detectors Buying Guide
  2. What does waterproof mean on a metal detector?
  3. How deep should a waterproof metal detector go?
  4. Which waterproof detector works best for target recovery?
  5. How does saltwater change metal detecting?
  6. What features matter besides the waterproof rating?
  7. Which waterproof metal detector should you choose?
  8. What should you carry with a waterproof detector?
  9. Final buying rule for waterproof metal detectors

Waterproof Metal Detectors Buying Guide

The best waterproof metal detectors buying guide starts with one question: will you search wet ground, shallow water or fully underwater? A waterproof coil can handle damp conditions without making the entire detector submersible, while a depth-rated pinpointer is designed for closer target recovery underwater.

For beach and river use, compare the detector's protection rating, stated submersion depth, search-coil design and saltwater guidance. Then match those details to your search area, because a detector made for wet soil may not suit diving or repeated underwater recovery.

A full-size detector covers ground and finds a target. A pinpointer narrows the target location after digging.

This difference matters more than the word “waterproof” on its own.

What does waterproof mean on a metal detector?

Waterproof means different things depending on which part of the detector has protection. A waterproof search coil is not the same as a fully submersible detector.

The search coil sits at the bottom of a full-size detector and is the part most likely to contact wet sand, shallow water or muddy soil. The control housing, display and cable connections may have different limits.

An IP rating gives a standard way to describe protection from solids and water. The letters are followed by numbers, and the second number relates to water protection.

A higher water number usually indicates stronger protection, but the rating still needs to be read alongside the manufacturer's depth instructions.

For buying decisions, separate these questions:

  • Can the search coil get wet?
  • Can the control box be splashed?
  • Can the complete detector be submerged?
  • How deep can it go?
  • Is saltwater use approved or explained?
  • What care is needed after use?

The Bounty Hunter TK4 Tracker IV has an IP54 rating and an 8 in waterproof search coil. That makes it a candidate for damp soil, sandy ground and shallow-water coil work, but the available product data does not describe the complete detector as submersible.

A detector with a stated underwater depth is easier to match to riverbeds or underwater recovery. Still, stay within the stated limit and check the maker's instructions before using it in saltwater.

For a broader comparison of detector types, see best metal detector that works in water.

How deep should a waterproof metal detector go?

Choose a depth rating based on your planned search depth, then leave a margin for movement and changing water. A 10 ft rating suits shallow underwater recovery, while a 20 ft rating gives more room for deeper work.

Depth ratings are not a measure of detection depth. They describe how far the device may be submerged when used within its protection limits.

A detector can be waterproof to a certain depth without finding a target at that same depth.

Think about your actual locations:

Search locationProtection need
Damp soil and wet grassWaterproof coil and protected controls
Shoreline and shallow waterWaterproof coil or a detector rated for shallow submersion
River edges and wet sandWater protection plus a plan for salt or mineralized ground
Riverbeds and underwater holesA complete device with a clear submersion depth
Deeper underwater workA depth rating that exceeds your planned working depth

The Minelab PRO-FIND 35 is fully waterproof up to 10 ft or 3 m underwater. The Garrett Pro-Pointer AT is submersible up to 20 ft, or about 6 m.

These two products are pinpointers, not wide-area search detectors. Their depth ratings help when recovering a target in wet soil, riverbeds or underwater holes after a larger detector has located the general area.

How do you choose a waterproof metal detector for beginners?

For beginners, choose the simplest setup that matches your water exposure. A coil-only waterproof detector can suit wet-land searching, while a submersible pinpointer adds value when you already use a full-size detector.

The Bounty Hunter TK4 Tracker IV has 3 detection modes, adjustable sensitivity, an LCD display and an 8 in waterproof search coil. Its title also identifies it for adults and kids, which may suit a household that wants a basic detector for parks, gardens, beaches and other outdoor searches.

Its IP54 rating is an important limit. The waterproof coil can contact shallow water, but the complete device should not be treated like a 10 ft or 20 ft underwater pinpointer.

The TK4 is a better match for someone who wants to scan a wider area than for someone whose main goal is underwater target recovery. Its battery-powered design also keeps the setup portable, but you still need to plan for safe handling around water.

For a beginner-focused comparison, read best waterproof metal detector for beginners.

Which waterproof detector works best for target recovery?

A waterproof pinpointer works best for target recovery because its smaller probe helps you locate a signal inside a dug hole. Choose one when you want a second tool for coins, rings, gold or other small targets.

A pinpointer does not replace the sweep area of a full-size detector. It helps after the main detector has narrowed the target location, which can reduce unnecessary digging and make wet recovery easier.

Minelab PRO-FIND 35: for deeper pinpointer work

The Minelab PRO-FIND 35 is fully waterproof to 10 ft or 3 m, with tone ID, adjustable sensitivity and 5 sensitivity levels. Its product title also includes a built-in flashlight, holster and lanyard.

The pinpointer uses audio and vibration indications that intensify as the probe approaches a target. Its ferrous tone ID provides 2 different responses to help separate ferrous junk from nonferrous targets.

Detector Interference Free technology is designed to reduce interference with an operating metal detector. That feature may help when the pinpointer is used close to a detector during target recovery.

Its 6.4 oz weight and battery-powered operation keep the tool compact for a detecting kit. The built-in flashlight, holster and lanyard are included, so the product is aimed at organized recovery work rather than wide-area searching.

The PRO-FIND 35 suits experienced detectorists who want more control over target response. For a brand-specific comparison, see best minelab waterproof metal detector.

Garrett Pro-Pointer AT: for deeper underwater recovery

The Garrett Pro-Pointer AT is submersible to 20 ft, making it the deeper-rated option in this guide. It has 3 sensitivity levels, a fast retune feature and orange visibility for use around water.

The single-button control handles power, retune, sensitivity adjustment and stealth mode. The pinpointer also has a molded ruler in inches and centimeters for judging target depth.

The product includes a woven belt holster and a 9-volt battery. Its battery average life is 60 minutes, and the device has an automatic power-off system after its warning sequence.

A lanyard attachment loop gives you a place to secure the pinpointer during shoreline or underwater work. The ruler can help you estimate how far a target sits in a hole, but it does not measure the detector's search depth.

The Garrett is the stronger fit when your main concern is submersion depth. The Minelab offers a lower 10 ft limit but adds 5 sensitivity levels and ferrous tone ID.

For a smaller tool comparison, read best small underwater metal detector.

How does saltwater change metal detecting?

Saltwater changes the search conditions through salt minerals, wet sand and moving water. Choose equipment with clear water protection, then expect to adjust your search method and care routine around the beach.

Salt can create a strong ground response that makes it harder to separate useful targets from the surrounding sand. Wet sand can behave differently from dry sand, so a detector setting that works inland may not work as well at the waterline.

The water itself also adds movement. Waves can shift sand, move small targets and make it harder to keep a search coil at a steady height.

A deliberate sweep pattern and controlled pace matter more when the ground is changing.

Before using a detector in saltwater, check:

  • Whether the complete detector or only the coil is waterproof.
  • The stated submersion depth.
  • The maker's saltwater instructions.
  • Whether the search mode or sensitivity can be adjusted.
  • How to rinse and dry the equipment after use.
  • Whether cables, battery doors and seals need special care.

Do not assume that an IP rating alone guarantees good saltwater performance. Protection from water and performance in mineralized wet sand are separate buying questions.

The Bounty Hunter TK4's 8 in waterproof coil can suit damp soil and shallow-water coil work, but its IP54 rating does not place it in the same submersion class as the Minelab PRO-FIND 35 or Garrett Pro-Pointer AT.

If beach targets are your main goal, also consider what kinds of finds you want to recover. This guide to What Can You Find With a Metal Detector? can help you set realistic search goals.

What features matter besides the waterproof rating?

The most useful features depend on how you search. Mode controls help with target filtering, sensitivity affects signal behavior, and tone or vibration feedback helps during close recovery.

A waterproof detector still needs to be comfortable and practical for the location. Look at these features before focusing on the highest depth rating.

Detection modes

The Bounty Hunter TK4 has 3 detection modes: all-metal, tone and discrimination. All-metal mode can give a broad response, while tone and discrimination modes help you change how the detector reports targets.

Mode controls matter when you move between open ground, trashy areas and wet sand. More modes do not guarantee better finds, but they give you more ways to match the detector to the search area.

Sensitivity adjustment

Sensitivity changes how strongly the detector responds to targets and surrounding conditions. High sensitivity may help with small targets, but lowering it can make a detector easier to use in noisy or mineralized ground.

The TK4 has adjustable sensitivity. The Minelab PRO-FIND 35 has 5 sensitivity levels, while the Garrett Pro-Pointer AT has 3.

Tone, vibration and target response

The Minelab PRO-FIND 35 combines audio and vibration, with intensifying feedback as the probe approaches a target. The Garrett Pro-Pointer AT also uses proportional audio and vibration.

These responses can help when you cannot see the target clearly. Vibration may also be useful when waves, wind or other outdoor noise make audio harder to hear.

Visibility and carrying

The Garrett Pro-Pointer AT uses an orange casing for visibility around water. It also has a lanyard attachment loop and includes a woven belt holster.

The Minelab PRO-FIND 35 includes a holster and lanyard, plus a built-in flashlight. A carrying system matters because a pinpointer is often used while you are holding a scoop, digging tool or recovered item.

Which waterproof metal detector should you choose?

Choose the device that matches your water depth and role. Pick the Bounty Hunter TK4 for general searching with an 8 in waterproof coil, the Minelab PRO-FIND 35 for 10 ft underwater target recovery with tone ID, or the Garrett Pro-Pointer AT for deeper 20 ft recovery.

The Bounty Hunter is the full-size detector in this group. Its 3 detection modes, LCD display and adjustable sensitivity suit broad searches on damp ground, beaches and shallow water.

Its IP54 rating means you should not treat the complete detector as a deep underwater device.

The Minelab and Garrett are pinpointers. They are better for narrowing a target after a full-size detector has already found a signal, and their stated submersion depths make them more suitable for wet holes, riverbeds and underwater recovery.

Your final check should be practical:

  1. Write down the deepest water you expect to enter.
  2. Separate wide-area searching from close target recovery.
  3. Confirm whether the waterproof claim covers the full device or only the coil.
  4. Compare the stated depth with your planned use.
  5. Check saltwater instructions before beach hunting.
  6. Plan how you will carry, rinse and dry the equipment.

Water protection is only one part of the decision. The best waterproof metal detectors buying guide result is the detector whose depth limit, search role and controls match the places you will actually search.

What should you carry with a waterproof detector?

Carry tools that help you recover and secure targets without putting the detector beyond its limits. A pinpointer, digging tool and secure connector can make wet recovery easier, but each item should suit the search environment.

A pinpointer helps narrow a target after the main detector finds it. The Minelab PRO-FIND 35 and Garrett Pro-Pointer AT are both designed for this close-range role, with different depth ratings and control features.

A magnet is a different tool from a metal detector. If you are choosing between them for ferrous objects in water, compare neodymium magnets vs regular magnets before building a magnet-fishing kit.

You may also need a secure way to attach a tool or lanyard. This comparison of snap hook vs carabiner explains the basic connector choice without treating either one as a substitute for proper equipment care.

Keep batteries, connectors and control housings protected during transport. After a wet search, follow the manufacturer's cleaning and drying instructions before storing the equipment.

Final buying rule for waterproof metal detectors

Choose a waterproof coil when you mainly search damp soil, wet grass or shallow shoreline areas. Choose a fully submersible pinpointer when your main need is locating targets inside wet holes or underwater recovery areas.

The Bounty Hunter TK4 is the broad-search option here, with 3 modes and an 8 in waterproof coil. The Minelab PRO-FIND 35 reaches 10 ft and adds 5 sensitivity levels plus ferrous tone ID.

The Garrett Pro-Pointer AT reaches 20 ft and adds 3 sensitivity levels, fast retune and orange visibility.

Before you order, match the depth rating to your real search depth and confirm whether saltwater use is covered by the manufacturer's instructions. That single check prevents the most common mistake in choosing waterproof metal detectors.

Frequently asked questions

Can every waterproof metal detector be fully submerged?

No. A waterproof search coil does not make the entire detector submersible.

Check the protection rating and stated depth limit for the complete device.

The Bounty Hunter TK4 has an IP54 rating and an 8 in waterproof coil, while the Minelab PRO-FIND 35 reaches 10 ft and the Garrett Pro-Pointer AT reaches 20 ft.

Are waterproof metal detectors safe to use in saltwater?

Some can be used around saltwater, but salt, wet sand and mineralized ground can affect detection and increase care needs. Confirm the manufacturer's saltwater instructions, use the correct search mode or sensitivity setting when available, and rinse equipment as directed after a beach hunt.

What is the difference between a metal detector and a pinpointer?

A metal detector searches a wider area with a search coil, while a pinpointer helps locate a target after you dig a smaller hole. The Minelab PRO-FIND 35 and Garrett Pro-Pointer AT are pinpointers, so they are best used for target recovery rather than as a replacement for a full-size search detector.

What depth rating should an underwater metal detector have?

Choose a rating that exceeds your planned depth, with room for waves, arm movement and accidental drops. A detector for damp soil or shallow shoreline work needs less depth protection than one used in riverbeds.

Never treat a coil-only waterproof claim as permission to submerge the control box.