What Battery Does a Garrett Pro-Pointer Use?
A Garrett Pro-Pointer uses one standard 9-volt battery. The Garrett Pro-Pointer AT also uses a 9-volt battery, and a spare is worth carrying on every hunt.
On this page (12 sections)
- Which Garrett Pro-Pointer models use a 9-volt battery?
- Where does the battery go in a Garrett Pro-Pointer?
- How do you replace a Garrett Pro-Pointer battery step by step?
- How long does the Garrett Pro-Pointer battery last?
- What battery types are compatible with a Garrett Pro-Pointer?
- Why does a new battery still not power the probe?
- How should you store a spare 9-volt battery for hunting?
- What other pinpointers use different power?
- How do you get the most life from the battery?
- What should you check before you buy a replacement battery?
- When should you replace the battery instead of the probe?
- Final check: is a 9-volt battery the right choice?
A Garrett Pro-Pointer uses one standard 9-volt battery, and the Garrett Pro-Pointer AT uses the same type. That makes this garrett pro pointer battery easy to find and easy to carry as a spare.
If you are new to pinpointers, start with What Is a Pinpointer? What You Should Know.
It explains why a small probe helps you find a target faster after your main detector signals.
Which Garrett Pro-Pointer models use a 9-volt battery?
Both the standard Garrett Pro-Pointer and the Garrett Pro-Pointer AT use a 9-volt battery. The AT version lists a 9-volt battery among its included components, along with a woven belt holster.
That shared battery type is useful if you own more than one Garrett probe. You can keep one spare in a pouch and use it in either unit.
If you are choosing between the two Garrett models, read Garrett Pro-Pointer vs Pro-Pointer AT: What Changes?. It compares waterproof depth, sensitivity, controls, and size so you can match the probe to your hunting style.
Does the Pro-Pointer AT use the same battery as the original?
Yes. The Pro-Pointer AT uses one 9-volt battery, just like the standard Pro-Pointer.
The main differences are in waterproofing, sensitivity settings, and controls, not battery shape.
The AT model is submersible to 20 feet and has three sensitivity levels. Garrett says it has a fast retune feature, a built-in ruler, and a lanyard loop.

The Garrett Pro-Pointer AT, a 20 ft submersible probe with three sensitivity levels and a 9-volt battery included.
See it on AmazonWhere does the battery go in a Garrett Pro-Pointer?
The battery sits inside the handle end of the probe, under a removable cap. You open the cap, slide in the 9-volt battery, and close it before use.
Match the battery terminals to the contacts inside. A 9-volt battery fits only one way without force, so stop if it feels stuck.
Close the cap firmly so the seal seats evenly. On the AT model, a loose cap can let water in, since the probe is meant for use to 20 feet.
How do you replace a Garrett Pro-Pointer battery step by step?
Replace the battery with the probe switched off and the cap dry. Work at a table so you do not drop the battery or cap in soil or water.
- Press the button to switch the probe off.
- Twist or pull off the battery cap as your model directs.
- Lift out the old 9-volt battery by its body, not by the terminals.
- Check the contacts for dirt, moisture, or corrosion.
- Insert a fresh 9-volt battery with terminals aligned to the contacts.
- Replace the cap and press the button to test power, sound, and vibration.
If the probe beeps weakly, replace the battery again with a known fresh one. Weak batteries can power a light or a faint beep without giving full sensitivity.
How long does the Garrett Pro-Pointer battery last?
Garrett does not publish one fixed run time for every setting, so battery life varies with use. Higher sensitivity, constant sound, vibration, cold weather, and long hunts all use more charge.
The Pro-Pointer AT has a lost probe alarm after 5 minutes of inactivity. After 60 minutes of warning chirps, it switches off automatically to save the battery.
That automatic shutoff helps, but it does not replace a spare. A pinpointer is often on for short bursts all day, and a spare 9-volt battery weighs almost nothing.
What battery types are compatible with a Garrett Pro-Pointer?
Use a standard 9-volt battery that matches Garrett's voltage and size specs for your model. Alkaline 9-volt batteries are the common choice for these probes.
Avoid forcing a battery that is slightly too large or has a different terminal layout. The cap must close fully for water resistance on the AT model.
Rechargeable 9-volt packs can fit the same shape, but run time differs by pack. Test any rechargeable option at home before a hunt, and keep a standard spare as backup.
If you are comparing brands, our Nokta pinpointer review covers a different probe and power setup. That comparison helps if you are deciding whether to stay with Garrett or switch brands.
Can you use a lithium 9-volt battery?
A lithium 9-volt battery may work if its size, voltage, and terminal shape match the standard 9-volt battery. Check the label before you buy, since some specialty packs are shaped differently.
Lithium batteries often weigh less and hold charge well in storage. Test one at home first, since some probes react to voltage curves differently.
Do not mix old and new batteries, and do not use a battery with a damaged case. A small saving is not worth a probe that fails over a target.
Why does a new battery still not power the probe?
A fresh battery does not fix every power problem, so check orientation and contacts first. Many no-power cases come from a battery seated backward or a cap not fully closed.
Wipe the contacts with a dry cloth and remove any green or white corrosion. Do not scrape contacts with a knife, since that can bend them and break contact.
Try a second fresh 9-volt battery from a different pack. If two fresh batteries fail, the trapped issue is more likely a loose contact, broken wire, or switch fault.
How should you store a spare 9-volt battery for hunting?
Store spares in a dry pouch, away from coins and metal tools. Keep the terminals covered so they do not short against other metal.
A small zip bag inside your find pouch works well. It keeps the battery dry on wet hunts and stops dirt from reaching the terminals.
Check spare batteries once a season and replace any that look swollen, leaking, or corroded. Date the storage bag so you know which spare to use first.
What other pinpointers use different power?
Not every pinpointer uses a 9-volt battery, so check the power type before you buy spares. The XP MI-6 is battery powered with a listed average battery life of 90 hours.
The MI-6 is fully connected to XP detectors, with wireless audio and 3 levels of sensitivity for use to 20 feet. It also has 50 levels of sensitivity when connected to an XP DEUS or ORX detector.

The XP MI-6 Pinpointer, a wireless probe for XP detectors with a 90 hour average battery life and 20 ft waterproof depth.
See it on AmazonThe Minelab PRO-FIND 35 is also battery powered, but its power details differ from Garrett's 9-volt setup. It is fully waterproof to 10 ft and has 5 sensitivity levels.

The Minelab PRO-FIND 35, a waterproof probe to 10 ft with five sensitivity levels and tone ID for ferrous and nonferrous targets.
See it on AmazonIf you plan to switch brands, confirm whether the probe uses disposable batteries, a rechargeable pack, or a built-in cell. That choice affects spares, charging gear, and how you pack for a long day.
How do you get the most life from the battery?
Turn the probe off between targets, since idle sound and vibration drain charge fast. Use the retune and sensitivity controls only when you need them.
On the Garrett Pro-Pointer AT, learn how to use a Garrett Pro-Pointer before your first hunt. Good technique means fewer minutes of constant beeping and less battery use.
Lower sensitivity in noisy ground can also help. A probe that chatters constantly uses more power and makes pinpointing harder.
What should you check before you buy a replacement battery?
Buy a standard 9-volt battery with the correct voltage and terminal shape. Look for a fresh date on the package and a reputable brand.
Garrett's own guidance for the AT Max battery system is covered in Garrett AT Max battery replacement. That guide is for the detector, not the pinpointer, so do not mix the two power systems.
For the Pro-Pointer itself, keep it simple: one fresh 9-volt battery in the probe and one spare in a dry pouch. That setup covers most hunts without extra gear.
When should you replace the battery instead of the probe?
Replace the battery when sound, vibration, or sensitivity drops. A weak battery often shows up as faint beeps, early shutoff, or a probe that stops responding at higher sensitivity.
If a fresh battery restores full sound and stable sensitivity, the probe is fine. If it does not, clean the contacts and test again before you assume the probe has failed.
Garrett lists the Pro-Pointer AT with a 2-year warranty in its product data. Check your warranty terms and keep proof of purchase if you need service.
Final check: is a 9-volt battery the right choice?
Yes, a Garrett Pro-Pointer uses one standard 9-volt battery, and the AT model uses the same type. Carry a spare, keep contacts clean, and close the cap fully after each change.
That simple plan keeps your probe ready for beach, park, and underwater hunts. Before your next trip, test power, sound, and vibration at home so a flat battery does not cost you a find.
Frequently asked questions
What battery does a Garrett Pro-Pointer use?
It uses one standard 9-volt battery. That is the rectangular battery with two terminals on top, widely sold for smoke alarms and household devices.
Check that the terminals are clean and that the battery is seated the correct way before you close the cap.
How long does a Garrett Pro-Pointer battery last?
Battery life depends on sensitivity, sound, vibration, temperature, and how often you power it on. Garrett notes automatic power off after 60 minutes of warning chirps on the Pro-Pointer AT, which helps save charge.
Carrying a spare 9-volt battery is the simplest way to avoid a dead pinpointer mid-hunt.
Can I use rechargeable batteries in a Garrett Pro-Pointer?
Use only the battery type and voltage Garrett specifies for your exact model. Some rechargeable 9-volt packs fit the shape but provide different voltage or run time, so test them at home first.
If a rechargeable pack gives weak sound or early shutoff, switch back to a fresh standard 9-volt battery.
Why will my Garrett Pro-Pointer not turn on after a battery change?
First check battery orientation, terminal contact, and cap tightness. Then try a known fresh 9-volt battery and clean any corrosion from the contacts with a dry cloth.
If it still will not power on, the issue may be a loose contact, damaged wiring, or a faulty switch rather than the battery.
About this guide: Our look at Garrett Pro-Pointer battery type and replacement draws on maker specs, materials and what owners report. See how we research.



