9 Best High Strength Magnets for Magnet Fishing (November 2026)
The best strongest magnet for magnet fishing include the Empire of Electronics AnglerMag™ Magnet Fishing Kit for a complete ready to use kit, the MUTUACTOR 500lbs Pulling Force Permanent N52 Neodymium for a lighter starter magnet, and the Magnetpro Fishing Magnet 4.72" Diameter Over 1700 for maximum magnet diameter.
On this page (8 sections)
- How we compared these strongest fishing magnets
- The best high strength magnets for magnet fishing
- How much pull force do you actually need?
- Single sided or double sided: which is stronger?
- What size magnet for magnet fishing should you pick?
- How do you set up a strong magnet for safe use?
- Who should skip the strongest magnets and start smaller?
- Which strongest magnet should you buy?
The best strongest magnet for magnet fishing for most buyers is a complete kit near 1300 to 1725 lb, because you get the rope, gloves and hook you need on day one. The Empire of Electronics AnglerMag Kit leads this group at 1325 lb double sided.
Pull force alone does not tell the full story. Diameter, single or double sided design, rope length and weight all change how a magnet feels in use.
A large magnet covers more bottom per cast. It also takes more arm strength to throw and lift out.
We compared specs, included items and stated pull force for industrial strength magnets for fishing. We did not test them in water.
Maker figures use a flat steel plate with no gap, so real finds will feel weaker when mud or rust sits between magnet and metal.
Our picks at a glance
-
1
Best for a complete ready to use kitEmpire of Electronics AnglerMag™ Magnet Fishing Kit
9.5/10 our score
See it on Amazon -
2
Best for a lighter starter magnetMUTUACTOR 500lbs Pulling Force Permanent N52 Neodymium
9.4/10 our score
See it on Amazon -
3
Best for maximum magnet diameterMagnetpro Fishing Magnet 4.72" Diameter Over 1700
9.2/10 our score
See it on Amazon
- 4
Check itPlatinum online products 1320LB’s Complete Magnet Fishing Kit
Best for a complete kit with a carry case - 5
Check itFINDMAG 1000 LBS Fishing Magnet Kit
Best for double sided value - 6
Check itFINDMAG 1725 LBS Fishing Magnet Kit
Best for a very strong complete kit - 7
Best for a large magnet only pickCheck it - 8
Check itMIKEDE Strong Neodymium Fishing Magnets 6 Pack
Best for a small multi pack - 9
Check itMaster Magnetics Powerful Retrieving and Holding Magnet
Best for light retrieving and holding
How we compared these strongest fishing magnets
We ranked by stated pull force first, then by kit completeness, diameter and practical trade offs. A 1725 lb magnet only may suit an experienced buyer.
A 1000 lb complete kit may suit a new buyer better.
Magnet grade matters, but it is not the only factor. N52 and N40 magnets appear in this group.
Size and thickness of the steel cup also affect how force reaches the bottom face.
Coating also matters for care. Several picks use a Ni+Cu+Ni triple layer coating, which FINDMAG and MIKEDE describe as rust resistant.
Rinse and dry after use, and store away from direct collisions.
How headline pull force figures are measured
Headline figures come from a vertical pull test against flat ferrous steel with no gap. That is why the same magnet feels weaker on a rusty pipe or a thin sheet.
MUTUACTOR notes that max force occurs with no gap between magnet and object.
Thickness of the target matters as well. Magnetpro explains that thin iron cannot absorb and maintain magnetic lines of force as well as thick iron.
A thin washer may slip even when a thick plate holds firm.
Diameter changes the contact patch in a second way. A 4.72 inch face spreads force across more steel than a 2.36 inch face, even if the grade is lower.
That wider patch helps on large flat metal.
What kit completeness adds in daily use
A magnet only pick leaves you to source rope, gloves and a grappling hook. Magnetpro magnet only models make that split clear, because thread closer 263 glue is already added at the eyelet but rope and gloves are not included.
Complete kits solve that in one box. The AnglerMag Kit lists 10 pieces including a scraper, towel and mesh bag, while the FINDMAG 1725 lb kit adds a hardshell case with foam insert.
Those extras are not filler. A scraper removes mud so the face can grip again.
A grappling hook helps with larger items that a magnet alone cannot lift sideways out of weeds.
The best high strength magnets for magnet fishing
Empire of Electronics AnglerMag™ Magnet Fishing Kit: Best for a complete ready to use kit
- 1325 lb double sided pull force
- 663 lb per side
- 60 ft rope
- 10 pieces including gloves, grappling hook and bag
A complete kit built around a 1325 lb double sided magnet, aimed at buyers who want rope and tools included.
Pros
- Complete 10 piece kit
- Double sided magnet
- Includes gloves and grappling hook
Cons
- Smaller diameter than the 4.72 in magnet
- You carry more accessories
This kit suits buyers who want a strong magnet and the tools to use it right away. The magnet is 1325 lb double sided, with 663 lb on each side, at 2.95 in diameter and 1.25 inches thick.
The kit includes a 60 ft rope, carabiner, grappling hook, gloves, scraper, towel, mesh bag, threadlocker and an eBook. That list covers setup, retrieval of larger items and cleaning the magnet face after a catch.
The pre sewn loop means no manual knot tying is needed at the magnet end.
Double sided design means you can fish on either face and flip the magnet if one side gets caked in mud. The 2.95 in size is large enough for serious pulling without the bulk of a 4.72 in magnet.
At that diameter, casting from a bank or bridge stays manageable.
Trade off: the diameter and pull force are below the Magnetpro and FINDMAG 1725 lb class. For most river, lake and dock use, the complete kit makes it the easier first buy.
You avoid separate rope and glove purchases.
MUTUACTOR 500lbs Pulling Force Permanent N52 Neodymium: Best for a lighter starter magnet
- 500 lb vertical pull force
- N52 neodymium
- 65 ft nylon rope
- Cut resistant gloves included
A compact 500 lb N52 kit with rope and gloves for buyers who want high strength without the largest size.
Pros
- Compact 2.36 in diameter
- 65 ft rope included
- N52 neodymium magnet
Cons
- 500 lb is well below the strongest picks here
- Single sided magnet
This kit suits buyers who want a compact N52 magnet with rope and gloves, and who do not need the largest pull force. The magnet is 500 lb vertical pull force at 2.36 in diameter.
MUTUACTOR includes a 65 ft nylon rope with locker and a pair of cut resistant gloves. The A3 iron protector uses Ni+Cu+Ni triple layer coating.
MUTUACTOR says loss of magnetic properties is no more than 2 percent within 10 years. That coating detail matters after repeated wet and dry cycles.
At 2.36 in, this magnet is easier to cast from a bridge or dock than a 3.7 in or 4.72 in model. It will find screws, bolts, tools and small metal in shallow water.
The 65 ft rope gives more reach than the 60 ft rope in the AnglerMag Kit, which helps on deeper banks.
It will feel limited on heavy submerged metal compared with 1000 lb and above picks. Choose it for lighter work and easier handling.
Skip it if your main target is heavy metal deep below.
Magnetpro Fishing Magnet 4.72" Diameter Over 1700: Best for maximum magnet diameter
- Over 1700 lb pulling force
- 4.72 in diameter
- N40 neodymium
- Flat design with no countersunk hole
A large 4.72 in magnet only pick rated over 1700 lb, aimed at buyers who already own rope and gloves.
Pros
- Largest diameter in this group
- Over 1700 lb pulling force
- Flat face for thin objects
Cons
- Magnet only, no rope or gloves
- Large size is harder to throw and carry
This magnet suits experienced buyers who already own rope, gloves and a grappling hook. It is rated over 1700 lb at 4.72 in diameter, the largest diameter in this group.
Magnetpro says the steel base is CNC machined and the magnet is N40 neodymium rare earth. The flat design has no countersunk hole, which Magnetpro says improves grip on thin objects and allows flush mounting.
Thread closer 263 glue is added at the eyelet connection, so the bolt is secured at the factory.
A 4.72 in face covers a wide strip of bottom on each cast. That helps when you scan a riverbed or canal.
The trade off is weight and wind resistance on the cast, plus harder retrieval when the magnet sticks hard to a large object.
This is a magnet only pick. Add rope, gloves and threadlocker from your existing rig before you fish.
Our guide to how to set up magnet fishing walks through that rig check. Plan your stance, because a catch at this size can pull hard.
Platinum online products 1320LB’s Complete Magnet Fishing Kit: Best for a complete kit with a carry case
- 1320 lb pull force
- N52 neodymium
- 65 ft rope
- Carry case included
A 1320 lb complete kit with a carry case, rope, gloves and grappling hook for organized transport.
Pros
- Complete kit with case
- N52 neodymium magnet
- 65 ft rope included
Cons
- 2.95 in diameter is smaller than the largest magnets
- Case adds bulk in a small bag
This kit suits buyers who want a strong complete set with a case for transport. The magnet is 1320 lb at 2.95 in diameter, with N52 neodymium.
Platinum online products includes a 65 ft rope, carabiner, grappling hook, gloves, towel, threadlocker and a carry case. The case helps if you walk to the water with the magnet, rope and tools in one place.
The included components list also names a hook and towel, which support cleaning and larger retrievals.
At 1320 lb, this sits close to the AnglerMag Kit in pull force. The 2.95 in diameter is a practical middle size for casting and pulling.
N52 grade is the higher grade in this group, and the magnet weighs 2 kg as a kit item.
Trade off: it does not reach the 1700 lb class, and the case adds bulk. If you mainly fish from a car boot, the case is a plus.
If you hike to remote spots, a lighter bag may suit you better. Compare carry method before you choose.
FINDMAG 1000 LBS Fishing Magnet Kit: Best for double sided value
- 1000 lb total pulling force
- 500 lb per side
- 2.95 in diameter
- 65 ft rope and gloves
A 1000 lb double sided kit at 2.95 in, with 500 lb on each side for buyers who want two fishing faces.
Pros
- Double sided magnet
- Complete kit with rope
- Ni+Cu+Ni triple layer coating
Cons
- 1000 lb total is below the 1700 lb class
- Each side is 500 lb
This kit suits buyers who want a double sided magnet at a lower pull force than the top picks. It is 1000 lb total, with 500 lb per side, at 2.95 in diameter and 25 mm thickness.
FINDMAG includes rope and gloves in the kit listing, with a 65 foot rope highlighted for retrieving. The magnet uses Ni+Cu+Ni triple layer coating on the steel cup.
FINDMAG says the coating helps prevent chipping or cracking. The 75 mm diameter and 25 mm thickness give a solid, flat face.
Double sided design gives two fishing faces. You can flip the magnet to try a cleaner face after a muddy cast.
Each side at 500 lb is still strong for tools, fasteners and medium metal. The eye bolt screws directly into the steel base for assembly.
Trade off: total pull force is below the 1320 lb and 1725 lb kits. If you plan to lift heavy submerged metal, step up to one of those.
If you want a balanced kit for regular use, this is a solid middle choice.
FINDMAG 1725 LBS Fishing Magnet Kit: Best for a very strong complete kit
- 1725 lb pulling force
- 3.7 in diameter
- 65 ft nylon rope
- Hardshell carrying case
A 1725 lb kit at 3.7 in with rope, gloves, grappling hook and a hardshell case for heavy submerged metal.
Pros
- 1725 lb pulling force
- Complete kit with case
- 65 ft rope included
Cons
- 3.7 in magnet is bulky to cast repeatedly
- Heavier to carry to the water
This kit suits buyers who want the strongest complete kit in this group. The magnet is 1725 lb at 3.7 in diameter, with a 65 ft nylon rope.
FINDMAG includes gloves, threadlocker, a carabiner, a grappling hook, yellow scrapers and a waterproof hardshell carrying case with foam insert. The case keeps the magnet and tools organized between trips.
The magnet measures 3.7 inches in diameter with 0.98 inch thickness.
The 3.7 in diameter covers more bottom than a 2.95 in magnet. That helps target larger metal and lift it with less slipping.
Ni+Cu+Ni triple layer coating protects the coated steel cup from rust and damage.
Trade off: a magnet this size is heavier to throw and pull back all day. It also needs care, since strong magnets can snap to steel and pinch fingers.
Plan for gloves and a clear space when you peel off a catch.
Magnetpro Fishing Magnet: Best for a large magnet only pick
- Over 900 lb pulling force
- 3.54 in diameter
- Neodymium rare earth magnet
- Flat design with no countersunk hole
A 3.54 in magnet only pick rated over 900 lb, for buyers who already have rope and want a wide fishing face.
Pros
- Wide 3.54 in face
- Over 900 lb pulling force
- Flat face design
Cons
- Magnet only, no rope included
- Large face is less nimble in tight spots
This magnet suits buyers who want a wide magnet only pick above 900 lb. It is over 900 lb at 3.54 in diameter, with a neodymium rare earth magnet.
Magnetpro says the base is CNC machined steel and the flat design has no countersunk hole. Magnetpro says that design improves grip on thin objects.
Thread closer 263 glue is added at the eyelet connection point, so you do not need to buy thread closer separately.
At 3.54 in, the face covers more riverbed per cast than a 2.95 in magnet. That can help you find scattered metal across a wider strip.
It is still below the 1700 lb class in stated pull force, and the grade listed for the Magnetpro range is N40.
Trade off: no rope, gloves or hook are included. You need a complete rig before you go.
If you already own rope rated for heavy loads, this is a focused upgrade. If not, a complete kit will cost less in extra purchases.
MIKEDE Strong Neodymium Fishing Magnets 6 Pack: Best for a small multi pack
- 6 pack
- 100 lb per magnet
- 1.26 in diameter
- Countersunk hole with eyebolt
Six small 1.26 in magnets at 100 lb each, for shallow water, docks and buyers who want spares.
Pros
- Six magnets in one pack
- Small size for tight spots
- Eyebolt design
Cons
- 100 lb each is far below heavy picks
- No rope included in the pack
This pack suits buyers who want small magnets for shallow water, docks and tight spots. Each magnet is 100 lb at 1.26 in diameter, and the pack holds 6.
MIKEDE says magnetic force is concentrated at the bottom, with steel cups on other sides. The coating is Ni+Cu+Ni triple layer.
Each magnet has a countersunk hole and eyebolt for rope attachment. The 32 mm diameter is the smallest in this group by a wide margin.
Small size makes these easy to throw from a dock, boat or bridge. You can keep spares in a bag, or fish with one magnet and swap if rope tangles.
They suit screws, nails, hooks and small tools. MIKEDE notes permanent strength and long service life for neodymium magnets.
Trade off: 100 lb each is far below heavy picks for submerged metal. No rope is included in the pack.
Choose this pack for light work and backup magnets. Choose a 1000 lb plus kit for heavier targets.
Master Magnetics Powerful Retrieving and Holding Magnet: Best for light retrieving and holding
- 150 lb pull in direct contact
- 5 x 2 x 1 in
- Eyebolt, nut and magnetic shield included
- Ceramic magnet
A rectangular 150 lb retrieving magnet with shield and eyebolt, suited to light holding and shallow finds.
Pros
- Magnetic shield included
- Removable eyebolt
- Compact to carry
Cons
- 150 lb is light for submerged metal
- Rectangular shape covers less water bottom
This magnet suits light retrieving and holding tasks more than heavy magnet fishing. It pulls 150 lb in direct contact with a 1/4 in thick flat steel plate, at 5 x 2 x 1 in.
Master Magnetics includes an eyebolt, nut and magnetic shields. The shields help prevent the magnet from attracting items at inconvenient times.
The removable eyebolt lets you attach rope when you want to fish. The thread size is 1/4-20, which helps you match hardware you may already own.
At 1.8 lb, it is easy to carry in a pocket, glove compartment or tool box. It can find keys, tools and small ferrous metal in shallow water, tanks and ponds.
The rectangular shape also works for holding flat steel surfaces, nails and hand tools indoors.
Trade off: ceramic magnet, rectangular shape and 150 lb pull are light for submerged metal. It covers less water bottom than a round 2.95 in or larger magnet.
Choose it for light retrieving, holding and shallow finds. Choose a neodymium kit for serious magnet fishing.
How much pull force do you actually need?
You need enough pull force to lift the metal plus the drag of mud, weeds and water. A 500 lb magnet handles small metal well.
A 1000 lb plus magnet handles heavier tools and larger objects.
Stated pull force assumes direct contact with a flat steel plate. Real targets are often rusty, thin or partly buried.
That gap cuts force fast. A larger diameter also spreads force over more area.
For most beginners, a complete kit at 1000 to 1325 lb is a practical start. Step up to 1700 lb plus if you fish deep water or target heavy metal.
Our magnet fishing basics guide explains the basics before you buy.
If you fish shallow water and docks
Choose 500 to 1000 lb. The MUTUACTOR 500 lb kit and FINDMAG 1000 lb kit fit this use.
Small magnets are easier to cast and pull over a dock edge.
Shallow water also means shorter rope needs. A 65 ft rope gives working room without tangling in a small space.
You can focus on scanning near posts and edges where metal collects.
If you fish rivers, lakes and canals
Choose 1000 to 1725 lb. The AnglerMag Kit, Platinum kit and FINDMAG 1725 lb kit fit this use.
Rope length and gloves matter as much as pull force here.
River current adds drag that does not show in a pull test. Bigger diameter helps grip larger flat targets, while a double sided face helps when one side picks up silt.
If you target heavy submerged metal
Choose 1700 lb plus, or a large diameter over 900 lb magnet only if you own a strong rig. The Magnetpro 4.72 in magnet fits this use.
Expect harder retrieval and plan your stance before you cast.
Heavy metal also changes the risk. A strong catch can jerk the rope sideways.
Keep your feet set, keep gloves on, and avoid wrapping rope around your hand. A grappling hook can help when a magnet alone cannot move a large object.
Single sided or double sided: which is stronger?
Double sided magnets give two fishing faces. Single sided magnets focus force on one face.
Compare per side pull force, not just the total.
The AnglerMag Kit is 1325 lb total, with 663 lb per side. The FINDMAG 1000 lb kit is 500 lb per side.
A single sided 1725 lb magnet focuses its stated force on one face.
Double sided design helps if you drag through mud. Flip the magnet to a cleaner face without cleaning first.
Single sided design may suit buyers who want maximum focus on one face.
For background on magnet materials, see our guide to neodymium vs rare earth magnets. It explains grades and why size still matters.
Why total pull force can mislead
A double sided total is split between two faces. That means a 1325 lb double sided magnet is not stronger per cast than a 1325 lb single sided magnet on that single face.
It gives you a second face, not double force on one face.
That split matters when you compare to a single sided 1725 lb kit. The FINDMAG 1725 lb magnet focuses its rating on one face at 3.7 in diameter.
The AnglerMag Kit spreads 663 lb per side at 2.95 in.
Flip convenience is the real gain. In muddy water, one face coats with silt while the other stays cleaner.
Flipping can restore grip faster than scraping, which is why double sided kits suit dragging over soft bottoms.
What size magnet for magnet fishing should you pick?
Pick size by water depth, casting distance and target weight. Larger diameter covers more bottom per cast.
Smaller diameter is easier to throw and retrieve.
A 2.36 in to 2.95 in magnet suits most buyers. A 3.54 in to 4.72 in magnet suits deeper water and larger targets.
A 1.26 in magnet suits docks and shallow pockets.
Weight matters for a full day. A large magnet plus rope plus a catch can tire your arms.
Take breaks, and use gloves when you peel metal off the face.
Our guide to what size magnet for magnet fishing helps you match size to your spots. Our best fishing magnet 60 mm roundup covers the popular 60 mm class in more detail.
How diameter affects casting and scanning
A wider face catches more bottom on each drag. That means fewer casts to cover a canal stretch.
It also means more surface drag through weeds and silt, so each pull takes more effort.
A narrower face is easier to place in a tight spot. Dock pilings and bridge shadows leave little room for a 4.72 in magnet to swing.
A 2.36 in or 2.95 in magnet fits those gaps with less risk of snagging.
Thickness also plays a role. Several picks list 0.98 inch thickness, while the AnglerMag Kit lists 1.25 inches.
A thicker body adds weight to every cast.
How do you set up a strong magnet for safe use?
Use rope rated well above the magnet pull force. Attach the eyebolt with threadlocker, and check the knot or carabiner before each cast.
Keep gloves on when you handle the magnet near steel.
Start with short casts to learn the weight. Stand clear of the magnet path on the back cast.
Peel catches off sideways, not by pulling fingers between magnet and steel.
Rinse the magnet face after use and dry it before storage. Store it away from collisions with hard objects.
Magnets are not malleable, and hard knocks can damage coating and edges.
Our guide to how to set up magnet fishing covers rope, knots and rig checks step by step. Do not use a frayed rope with a heavy magnet.
Rope, knots and storage checks
Check the rope for fraying, sun damage and cuts before you attach a heavy magnet. A 65 ft nylon rope and a 60 ft rope both need the same inspection, because a worn section can fail under load.
Check the eyebolt and carabiner each trip. Threadlocker helps keep the bolt tight, and several kits include it for that reason.
Magnetpro models add thread closer 263 glue at the factory, but you should still check the joint before casting.
Store the magnet face away from hard knocks and other magnets. Ni+Cu+Ni coating helps against rust, but it does not protect against dents from drops.
A case, mesh bag or foam insert keeps the face clean and reduces damage in transit.
Who should skip the strongest magnets and start smaller?
New buyers, kids and anyone fishing from a high bridge should start smaller. A 1700 lb magnet can be hard to control on the cast and hard to pull back with a catch.
Our best fishing magnet for beginners roundup covers lighter starting picks. Our best fishing magnets for kids guide covers small, safe options for younger fishers.
If you fish with family, choose a complete kit with gloves. The AnglerMag Kit and Platinum kit include gloves and tools that help everyone handle catches with more care.
Smaller magnets also teach technique. You learn to cast, drag slowly and feel for hits without fighting a heavy magnet.
That skill transfers when you step up later.
Which strongest magnet should you buy?
Pick the Empire of Electronics AnglerMag Kit if you want a complete 1325 lb double sided kit ready to use. For the strongest complete kit with a case, pick the FINDMAG 1725 lb kit.
For a magnet only above 1700 lb, pick the Magnetpro 4.72 in magnet if you already own a strong rig.
For lighter casting, pick the MUTUACTOR 500 lb kit. For double sided value, pick the FINDMAG 1000 lb kit.
For small spares, pick the MIKEDE 6 pack. For light retrieving and holding, pick the Master Magnetics magnet.
Before you order, check rope length against your deepest spot. Check diameter against your casting space.
Check kit contents against the gloves and hook you already own.
For a final size check, read our what size magnet for magnet fishing guide. For kit ideas by brand, see our best Brute Magnetics fishing kits guide.
Our top 3 picks at a glance
-
1
Best for a complete ready to use kitEmpire of Electronics AnglerMag™ Magnet Fishing Kit
9.5/10 our score
See it on Amazon -
2
Best for a lighter starter magnetMUTUACTOR 500lbs Pulling Force Permanent N52 Neodymium
9.4/10 our score
See it on Amazon -
3
Best for maximum magnet diameterMagnetpro Fishing Magnet 4.72" Diameter Over 1700
9.2/10 our score
See it on Amazon
Frequently asked questions
What is the strongest magnet for magnet fishing?
In this group, the FINDMAG 1725 lb kit and the Magnetpro 4.72 inch magnet rated over 1700 lb are the strongest by stated pull force. Choose a kit if you need rope and gloves, or a magnet only if you already own a suitable rig.
Is a double sided magnet stronger than a single sided magnet?
A double sided magnet gives you two fishing faces, but the stated total is split between sides. Compare per side pull force, diameter and actual use, not the total alone, when you choose between double and single sided designs.
What size magnet should you get for magnet fishing?
Start with the water depth, target weight and how often you cast. Larger diameter magnets cover more bottom and grip larger metal, while smaller magnets are easier to throw and retrieve from docks and bridges.
Do you need gloves for magnet fishing?
Gloves help protect your hands from sharp metal, rust and the magnet snapping to steel. Cut resistant gloves are included with several kits here, and they also help when you peel a catch off a strong magnet.
About this guide: Our look at strongest magnet for magnet fishing draws on maker specs, materials and what owners report. See how we research.



