9 Best Neodymium Fishing Magnets (November 2026)
The best neodymium fishing magnets include the DIYMAG Fishing Magnet for most starters, the DIYMAG Fishing Magnets with Countersunk Hole 2.36 for simple retrieval, and the MUTUACTOR 500lbs Pulling Force Permanent N52 Neodymium (best 500 lb starter kit).
On this page (9 sections)
- Our top neodymium fishing magnets, compared
- How do these fishing magnets compare side by side?
- What pull force do you actually need?
- Single-sided, double-sided or 360-degree: which design fits you?
- What should be in the box?
- How do you set up and care for a neodymium fishing magnet?
- Buying advice: strong magnets for heavy retrieval
- More guides on this topic
- Our verdict: which neodymium fishing magnet should you buy?
The best neodymium fishing magnet for most people is the DIYMAG Fishing Magnet, because its 2.36-inch, 500 lb single-sided design is easy to cast, easy to clean and strong enough for everyday finds. If you want a ready-to-cast package, the MUTUACTOR and FINDMAG 500 lb kits add rope and gloves.
If you want heavier retrieval, the FINDMAG 1725 lb kit and the double-sided kits give you more force and more gear in the box.
Our score weighs specs, features and buyer feedback against what you are shopping for. A higher score means a better match for the search, not a promise about any single cast.
Pull force is a maker rating under ideal contact, and real results drop with mud, rust, gaps and odd shapes.
Start with our magnet fishing basics guide if this is your first magnet. It covers rope choice, knots, gloves and safe casting habits.
You can also read how do fishing magnets work before you pick a size, since that page explains why contact matters more than the headline number.
Our picks at a glance
-
1
-
2
Best for simple retrievalDIYMAG Fishing Magnets with Countersunk Hole 2.36
9.6/10 our score
See it on Amazon -
3
Best 500 lb starter kitMUTUACTOR 500lbs Pulling Force Permanent N52 Neodymium
9.4/10 our score
See it on Amazon
- 4
Check itFINDMAG 500 LBS Neodymium Fishing Magnet Kit
Best ready-to-cast kit - 5
Check itPlatinum online products 1320LB’s Complete Magnet Fishing Kit
Best double-sided complete kit - 6
Check itFINDMAG 1725 LBS Fishing Magnet Kit
Best for heavier retrieval - 7
Best for flush thin metalCheck it - 8
Check itMIKEDE Strong Neodymium Fishing Magnets 6 Pack
Best budget multi-pack - 9
Check itVNDUEEY 1000LBS Magnet Fishing Kit
Best value double-sided kit
Our top neodymium fishing magnets, compared
This group spans 100 lb mini magnets, 500 lb starter magnets, 900 lb to 1725 lb big magnets and double-sided kits. Prices and ratings aside, the real split is size, face design and what comes in the box.
A small magnet wins in shallow water, while a big magnet wins when you need to hold a heavy load steady.
DIYMAG Fishing Magnet: Best for most starters
- 2.36 inch diameter
- 500 lb pull force
- Neodymium magnet in steel cup
- Ni+Cu+Ni triple layer coating
- Countersunk hole with eyebolt
A 2.36-inch single-sided magnet at 500 lb, sized for bridges, docks and pond edges without feeling oversized.
Pros
- Simple single-sided design
- Rust-resistant coating
- Permanent neodymium strength
Cons
- Magnet only, no rope or gloves
- 500 lb is a starter ceiling
The DIYMAG Fishing Magnet suits beginners who want one magnet that works from docks, bridges and pond banks. It is 2.36 inches across with a 500 lb rating, a size you can throw and pull in by hand without fighting the weight on every cast.
Its neodymium base sits in a steel cup with a Ni+Cu+Ni triple layer coating. For a material comparison, see neodymium vs ceramic magnets.
That coating helps resist rust and protects the magnet from chips when it knocks against rocks or a dock edge.
The steel cup also keeps magnetic force concentrated at the bottom, so the sides stay easier to handle and clean. The eyebolt screws into the countersunk hole, so you can attach rope and start fishing right away.
The trade-off is scope. You get the magnet only, with no rope, gloves or case.
A 500 lb ceiling also means heavy, flat loads will slip off sooner than they would with a 1320 lb or 1725 lb pick. For most first-year finds, that limit rarely matters.
DIYMAG Fishing Magnets with Countersunk Hole 2.36: Best for simple retrieval
- 2.36 inch diameter
- 500 lb pulling force
- Neodymium base
- Ni+Cu+Ni triple layer coating
- Countersunk hole and eyebolt
Nearly the same 500 lb single-sided setup as the top DIYMAG pick, for buyers who want the plain magnet form.
Pros
- Clean 2.36-inch round form
- Coated steel cup protects the magnet
- Made under ISO 9001 quality systems
Cons
- No rope or accessories included
- Same 500 lb limit as similar picks
This DIYMAG magnet suits buyers who want the same 500 lb class in a plain, focused form. It is 2.36 inches in diameter with a 500 lb pulling force, and the force stays concentrated on the bottom face while the steel cup shields the sides.
The Ni+Cu+Ni triple layer coating gives it a shiny, rust-resistant finish. DIYMAG says the magnet is made under ISO 9001 quality systems and backs it with a 60-day money-back promise.
The countersunk hole and eyebolt keep setup simple for lifting, hanging and retrieving jobs around a yard or dock. Neodymium keeps its permanent strength over time, so the hold does not fade like a temporary magnet would.
Against the top pick, this one is a near twin rather than a step up. It also ships as a magnet only, so you still need rope and gloves.
Pick it if you already own gear, or if you prefer this exact form factor for storage.
MUTUACTOR 500lbs Pulling Force Permanent N52 Neodymium: Best 500 lb starter kit
- 500 lb vertical pull force
- N52 neodymium
- 65 ft nylon rope with locker
- Cut-resistant gloves
- Ni+Cu+Ni triple layer coating
A 500 lb N52 magnet bundled with 65 ft of rope and gloves, so you can start casting without buying extras.
Pros
- Rope and gloves included
- N52 neodymium grade
- Corrosion-resistant coating
Cons
- Rope length limits deep water
- Single-sided only
The MUTUACTOR kit suits starters who want everything in one box. The magnet itself is 500 lb with N52 neodymium, and the kit adds a 65 ft nylon rope with a locker plus cut-resistant gloves.
That bundle saves a second shopping trip.
N52 is a higher neodymium grade than standard grades, and MUTUACTOR says max force hits when there is no gap between magnet and metal. In plain terms, a clean, flat contact gives you the best hold.
A muddy or rusty contact cuts that hold fast, no matter the grade. The A3 iron protector uses Ni+Cu+Ni triple-layer coating for corrosion resistance, and the maker claims loss of magnetic properties stays within 2 percent over 10 years.
The trade-off is depth and design. The 65 ft rope limits how deep you can fish, and the magnet is single-sided, so it covers less bottom per pass than a double-sided kit.
It is still a strong first kit for rivers, wells, garages and yards.
FINDMAG 500 LBS Neodymium Fishing Magnet Kit: Best ready-to-cast kit
- 500 lb pull force
- 2.36 inch diameter
- 65 ft nylon rope
- Steel carabiners
- Fishing gloves and 242 threadlocker
A 500 lb kit with rope, carabiners, gloves and threadlocker for a close supply check before your first cast.
Pros
- Full starter kit included
- Threadlocker for the eyebolt
- Triple layer coating
Cons
- Heavier magnet body at 2.6 in height
- Still capped at 500 lb
The FINDMAG 500 lb kit suits buyers who want a close supply check before the first cast. The magnet is 2.36 inches across at 500 lb, and the kit adds a 65 ft nylon rope, steel carabiners, tough fishing gloves and 242 threadlocker for the eyebolt.
That threadlocker matters. A loose eyebolt can cost you the magnet, so FINDMAG tells you to tighten the screw and check it often.
The Ni+Cu+Ni triple layer coating and stamped steel cup help protect against rust, chips and cracks. The round magnet assembles with the eye bolt screwed directly into the steel base, so you attach a rope and begin your search without special tools.
The trade-off is size and weight. The magnet body is taller than some rivals, and the kit still tops out at 500 lb.
If your water is deep or your finds are heavy, step up to a 1000 lb class kit instead.
Platinum online products 1320LB’s Complete Magnet Fishing Kit: Best double-sided complete kit
- 1320 lb pull force
- Double-sided N52 neodymium magnets
- 65 ft rope
- Carabiner, gloves, grappling hook and carry case
A 1320 lb double-sided kit with a grappling hook and carry case for wider searches and heavier finds.
Pros
- Double-sided pulling surface
- Grappling hook included
- Carry case for transport
Cons
- Larger 2.95-inch body
- Needs more care to handle
The Platinum online products kit suits anglers who want a double-sided magnet plus tools for bigger finds. It is rated at 1320 lb with N52 neodymium magnets, and the kit adds a 65 ft rope, carabiner, gloves, grappling hook and carry case.
A double-sided design gives you two pulling faces, so the magnet can catch metal on the down pass and on the return. The grappling hook helps when a small magnet grabs something tangled that needs a nudge.
The carry case keeps rope, hook and gloves sorted in transport. The N52 grade supports strong hold on flat contact, and the 2.95-inch diameter spreads that force over a wider face than the 2.36-inch starters.
The trade-off is handling. A 2.95-inch double-sided body is heavier to throw and pull than a 2.36-inch single, and it needs more room on a small dock.
Students of double-sided use should read our magnet fishing double sided magnet tips page before the first outing.
FINDMAG 1725 LBS Fishing Magnet Kit: Best for heavier retrieval
- 1725 lb pulling force
- 3.7 inch diameter
- 65 ft nylon rope with carabiner
- Grappling hook, gloves and hardshell case
- Ni+Cu+Ni triple layer coating
A 3.7-inch magnet rated at 1725 lb with a full case kit, built for stronger pulls and bigger metal.
Pros
- Highest pull force here
- Large 3.7-inch face
- Hardshell case included
Cons
- Heavy and bulky to cast
- Best for experienced users
The FINDMAG 1725 lb kit suits experienced users chasing heavy retrieval. At 1725 lb and 3.7 inches across, it is the strongest and widest magnet in this group, built for lifting and hanging as well as fishing.
The kit is thorough. You get a 65 ft nylon rope with a carabiner, a grappling hook, gloves, 242 threadlocker, yellow scrapers and a waterproof hardshell case with a foam insert.
The Ni+Cu+Ni triple layer coating helps the steel cup resist rust and chips. The magnet measures 3.7 inches in diameter with a thickness of 0.98 inches, so the large face can sit flush against bigger plates and tools that small magnets would miss.
The trade-off is effort. A magnet this size is tiring to cast all day, and a strong pull can drag you off balance from a slick bank.
It also needs storage space for the case. Choose it for heavy work, not for casual shallow-water casting.
Magnetpro Fishing Magnet: Best for flush thin metal
- Over 900 lb pulling force
- 3.54 inch diameter
- Neodymium rare earth magnet
- Eyebolt connection
- CNC machined steel base
A 3.54-inch magnet rated over 900 lb with a flat, no countersunk design for flush contact with thin metal.
Pros
- Flat face for thin objects
- Strong 900 lb rating
- Thread closer added at connection
Cons
- Magnet only, no kit extras
- Large diameter is harder to throw
The Magnetpro magnet suits buyers who fish for thin, flat metal. It is 3.54 inches across with over 900 lb of pull, and its flat design has no countersunk hole breaking up the face.
That flat face can sit flush against thin sheets and plates.
The steel base is CNC machined, and Magnetpro says it adds 263 thread closer at the eyebolt connection. That helps keep the eyelet tight during casting.
The maker also warns that magnets are not malleable, so avoid hard collisions and slide magnets apart sideways. The magnet uses an N40 grade in the maker description, with attention to thickness and neodymium content rather than a thin disc.
The trade-off is kit scope. You get the magnet only, with no rope or gloves, and the large diameter is harder to throw far.
For dock and river work where thin metal matters, the flat face is a real plus.
MIKEDE Strong Neodymium Fishing Magnets 6 Pack: Best budget multi-pack
- 100 lb pulling force each
- 1.26 inch diameter
- 6 pack
- Neodymium base
- Ni+Cu+Ni triple layer coating
Six small 1.26-inch magnets at 100 lb each for shallow water, gutters, school projects and light retrieval.
Pros
- Six magnets in one pack
- Small size for tight spots
- Coated steel cup
Cons
- 100 lb per magnet is light
- Not for deep or heavy finds
The MIKEDE 6 pack suits light duty and shallow water. Each magnet is 1.26 inches across at 100 lb, and you get six of them for the price of one big magnet.
That makes this a fun starter for kids, classrooms and gutter or pond-edge searches.
The small size slips into tight spots a big magnet cannot reach. Each one uses a neodymium base in a steel cup with Ni+Cu+Ni triple layer coating, and the countersunk hole takes an eyebolt for rope.
MIKEDE says the magnets are made under ISO 9001 quality systems. The force is concentrated at the bottom while the steel cup limits side pull, which keeps small magnets from clinging to every pipe they pass.
The trade-off is power. At 100 lb each, these will not lift heavy loads or hold in current.
Treat them as learning tools and light retrieval picks, not as replacements for a 500 lb or 1000 lb magnet.
VNDUEEY 1000LBS Magnet Fishing Kit: Best value double-sided kit
- 1000 lb total double-sided pull force
- 2.95 inch diameter
- 65 ft rope
- Carabiner and gloves
- 25 mm thickness
A 2.95-inch double-sided kit rated at 1000 lb total, with rope, carabiner and gloves for river and lake use.
Pros
- Two pulling faces
- Kit extras included
- Good mid-range power
Cons
- Total rating is split across two sides
- Lighter kit build than heavier picks
The VNDUEEY kit suits buyers who want double-sided coverage on a budget. The magnet is 2.95 inches across with 1000 lb of total double-sided pull, and the kit adds a 65 ft rope, carabiner and gloves.
One magnet gives you twice the pulling surface.
The dual-sided design helps you catch metal as the magnet sinks and as you drag it back. The eyebolt screws straight into the steel base, so setup is fast.
VNDUEEY positions this for rivers, lakes, wells, canals and ponds, plus yard and garage cleanup. The magnet is 75mm in diameter and 25mm thick, so the face is wide enough to sweep a path but still light enough for repeated casts from a bank.
The trade-off is how the rating splits. A 1000 lb total across two faces means each face works below that headline number.
If you need single-face power, a single-sided 900 lb or 1320 lb pick may hold better on a heavy load.
How do these fishing magnets compare side by side?
| Product | Best for | Pull Force | Diameter | Shape | Our score |
|---|---|---|---|---|---|
| DIYMAG Fishing Magnet | most starters | 500 lb | 2.36 in | Round | 9.7 |
| DIYMAG Fishing Magnets with Countersunk Hole 2.36 | simple retrieval | 500 lb | 2.36 in | Round | 9.6 |
| MUTUACTOR 500lbs Pulling Force Permanent N52 Neodymium | 500 lb starter kit | 500 lb | 2.36 in | 9.4 | |
| FINDMAG 500 LBS Neodymium Fishing Magnet Kit | ready-to-cast kit | 500 lb | 2.36 in | 9.3 | |
| Platinum online products 1320LB’s Complete Magnet Fishing Kit | double-sided complete kit | 1320 lb | 2.95 in | 9.1 | |
| FINDMAG 1725 LBS Fishing Magnet Kit | heavier retrieval | 1725 lb | 3.7 in | 8.9 | |
| Magnetpro Fishing Magnet | flush thin metal | 900 lb | 3.54 in | Round | 8.3 |
| MIKEDE Strong Neodymium Fishing Magnets 6 Pack | budget multi-pack | 100 lb | 1.26 in | 8.2 | |
| VNDUEEY 1000LBS Magnet Fishing Kit | value double-sided kit | 1000 lb | 2.95 in | 8.1 |
We compared these picks by pull force, diameter, face design, coating and kit contents. We checked the specs for each magnet, then matched them to real uses like bridge fishing, dock cleanup and heavy lifting.
A 500 lb magnet and a 1725 lb magnet solve different jobs, so the score rewards the right tool for the search, not just the biggest number.
We also weighed rope length, gloves, cases and hooks. A kit that includes 65 ft of rope and gloves saves you a separate order.
A magnet-only pick saves money if you already own gear. Neither choice is wrong.
The wrong choice is a magnet that is too heavy to cast safely or too weak for your water.
Why diameter matters as much as pull force
Diameter changes how a magnet fishes in ways the pull number alone does not show. A 2.36-inch magnet slides along a bottom and fits under dock edges, while a 3.7-inch magnet covers more area per pass and holds a larger flat load once it connects.
Thin iron also matters, because a thin sheet cannot carry magnetic force as well as a thick plate. That is why the Magnetpro flat face and the large FINDMAG face can outperform a rating on paper when the target is a sheet, a tool or a bike frame.
What pull force do you actually need?
Start at 500 lb for most people. That rating handles nails, screws, tools, scrap and small lost items from a bridge or dock.
It is light enough to cast all afternoon and strong enough to free from mud.
Step up to 900 lb to 1320 lb if you fish fast water, deep holes or spots with heavy scrap. Step up to 1725 lb only if you plan to lift heavy loads or pull from a boat.
A 4000 lb magnet sounds better, but most buyers do not need it. The extra weight makes casting tiring and freeing a stuck magnet harder.
Our best single-sided neodymium fishing magnet guide breaks down single-sided power in more detail. Read it if you want maximum hold on one face.
If you want two faces, our best double sided fishing magnet picks cover that design next.
500 lb class
The 500 lb class includes the two DIYMAG magnets and both 500 lb kits. This is the sweet spot for beginners.
You get real strength without a heavy throw. Most river finds weigh far less than 500 lb, so the limit shows up only on large flat loads.
900 lb to 1725 lb class
The Magnetpro at over 900 lb, the VNDUEEY at 1000 lb total and the FINDMAG at 1725 lb serve stronger needs. These big magnets for magnet fishing hold better in current and on heavy scrap.
They also demand better rope handling and a stable stance on the bank.
Single-sided, double-sided or 360-degree: which design fits you?
Single-sided is the easiest to learn. All force sits on one face, so dragging along the bottom feels direct.
Our top two picks use this design, and it suits narrow docks and bridges.
Double-sided covers more ground. Two faces catch metal on the way down and on the way back.
The Platinum 1320 lb kit and the VNDUEEY 1000 lb kit use this setup.
Our best 360 degree fishing magnet guide covers the widest coverage option. You can also read our 360 fishing magnet tips and tricks and 360 fishing magnet pros and cons before you choose.
What kind of magnet should you use?
Our what kind of magnet for magnet fishing guide explains grades, coatings and cup design. Neodymium with Ni+Cu+Ni coating shows up on almost every pick here.
That coating helps with rust, chips and cracks in wet use.
Size and strength trade-offs
Size grows with pull force. A 1.26-inch mini magnet is easy to throw but weak.
A 3.7-inch big magnet is strong but tiring. Our magnet fishing double sided magnet size guide helps you match size to water depth and bank access.
What should be in the box?
A kit should include rope, gloves and a way to lock the eyebolt. The MUTUACTOR kit includes rope and gloves.
The FINDMAG 500 lb kit adds carabiners and threadlocker.
The FINDMAG 1725 lb kit adds a grappling hook, scrapers and a hardshell case.
A magnet-only pick like the DIYMAG magnet or the Magnetpro magnet saves space and money if you already own rope and gloves. Make sure your rope is rated well above the magnet pull.
A weak rope fails before a strong magnet does.
If you want a handle for control, our best fishing magnet with handle picks show that setup. If you prefer a compact block shape, our magnet fishing cube guide explains that choice.
For eye-bolt rigging, see our best magnet with eye bolt picks.
Rope length and strength
Most kits here include 65 ft of rope. That covers bridges, docks and many pond edges.
Deep lakes and tall bridges need longer rope. Always check your rope rating against the magnet pull before you cast from height.
How do you set up and care for a neodymium fishing magnet?
Tighten the eyebolt, lock it, then check it on every trip. Threadlocker like 242 or 263 shows up in several kits here.
A loose eyebolt is the top cause of lost magnets, so check tightness before you cast and after any hard knock.
After each session, rinse the magnet, scrape off debris and dry it fully. Our how to clean a magnet guide walks through that routine.
Store it away from cards, phones and other magnets, since neodymium can snap together hard and chip when it hits steel.
If your magnet sticks to something you cannot lift, do not yank from a bad angle. Change position, pull sideways and use the rope angle to break it free.
Our how to detach a magnet guide covers safe separation for stuck loads.
Buying advice: strong magnets for heavy retrieval
Buy the kit that matches your water, not the biggest headline. A 500 lb kit wins for casual river and dock fishing.
A 1320 lb or 1725 lb kit wins for heavy retrieval and boat work.
What is a big magnet for magnet fishing?
A big magnet usually means a diameter over 3 inches or a pull over 900 lb. The Magnetpro at 3.54 inches and the FINDMAG at 3.7 inches fit that idea.
Big magnets hold heavy loads better but need more bank room and arm strength.
Fishing magnets 4000 lb: do you need that class?
Fishing magnets 4000 lb seek buyers who want maximum lift, but they are heavy and hard to free when stuck. None of the picks here reach 4000 lb, and most readers do not need it.
A 1725 lb magnet already handles heavy scrap that smaller magnets miss.
More guides on this topic
- How to Use a Double-Sided Fishing Magnet
Our verdict: which neodymium fishing magnet should you buy?
Pick the DIYMAG Fishing Magnet for most starters, the MUTUACTOR kit for a ready-to-cast 500 lb setup, and the FINDMAG 1725 lb kit for heavy retrieval. For double-sided coverage, pick the Platinum 1320 lb kit if you want the grappling hook and case, or the VNDUEEY 1000 lb kit for a lighter bundle.
The best neodymium fishing magnet is the one you can cast safely all day. Match pull force to your water, choose single or double-sided faces by how you fish, and never cast with a loose eyebolt.
Start with the top DIYMAG pick, learn rope control, then step up in size when your finds outgrow it.
Our top 3 picks at a glance
-
1
-
2
Best for simple retrievalDIYMAG Fishing Magnets with Countersunk Hole 2.36
9.6/10 our score
See it on Amazon -
3
Best 500 lb starter kitMUTUACTOR 500lbs Pulling Force Permanent N52 Neodymium
9.4/10 our score
See it on Amazon
Frequently asked questions
What is the best neodymium fishing magnet for a beginner?
A 500 lb magnet around 2.36 inches in diameter is the easiest starting point. It is light enough to cast from a bridge and strong enough for nails, bolts, tools and scrap.
Move to a larger kit only after you learn rope handling and cleaning.
Are fishing magnets 4000 lb better than 500 lb magnets?
A 4000 lb rating helps only when you need to lift a heavy, flat load with full contact. Most river finds are small and tangled, so a 500 lb to 1725 lb magnet finds just as many items.
Bigger magnets are heavier, harder to throw and harder to free.
Single-sided or double-sided: which should you choose?
Single-sided magnets focus all force on one face and are simpler to drag along a bottom. Double-sided magnets give you two pulling faces and slide over more ground.
Choose single-sided for simple control, and double-sided if you want wider coverage per cast.
How do you clean a fishing magnet after a cast?
Rinse the magnet in fresh water, then pick off mud and debris with a scraper or old brush. Dry it fully before storage so the coating can do its job.
Wear gloves, because sharp metal and rusty edges collect on the face after every cast.
About this guide: Our look at neodymium fishing magnets draws on maker specs, materials and what owners report. See how we research.



